DESIGN OF AN EXPERIMENTAL SETUP TO MEASURE TOOL-PLY AND PLY-PLY FRICTION IN THERMOPLASTIC LAMINATES

被引：24

作者：

ten Thije, R. H. W. ^{[1
]}

Akkerman, R. ^{[1
]}

机构：

[1] Univ Twente, Dept Mech Engn, NL-7500 AE Enschede, Netherlands

来源：

INTERNATIONAL JOURNAL OF MATERIAL FORMING | 2009年 / 2卷

关键词：

friction; lubrication; thermoplastic; composite; forming;

D O I：

10.1007/s12289-009-0638-y

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Friction plays an important role in forming processes of thermoplastic laminates. A model is currently developed to predict the frictional properties of these materials and validation experiments are being conducted. The development of a friction measurement rig for thermoplastic composites is not straightforward. Controlling the transverse pressure profile on the laminate is essential for accurate measurements. Mould deflections and the setup type used (pull-out versus pull-through) have a significant effect on homogeneity of the profile. This is validated by measurements of the pressure profile and analyses of the experimental setup. In turn, the inhomogeneity of the pressure profile can make the experimentally obtained friction properties unsuitable for model validation.

引用

页码：197 / 200

页数：4

共 7 条

[1]

AKKERMAN R, 2007, P 10 INT ESAFORM C

[2]

Akkerman R., 2008, P 11 INT ESAFORM C

[3]

Clifford MJ, 2006, P TEXCOMP 8

[4]

Gorczyca-Cole Jennifer L., 2007, COMPOS PART A-APPL S, V38, P393

[5] Thermoforming-stamping of continuous glass fiber/polypropylene composites: Interlaminar and tool-laminate shear properties [J].

Lebrun, G ;

Bureau, MN ;

Denault, J .

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2004, 17 (02) :137-165

[6]

Murtagh AM, 1993, P ICCM 9 MADR SPAIN, P311

[7]

Willems An, 2008, THESIS U LEUVEN BELG

← 1 →