Study on Experiment of Drilling for Titanium Alloy Ti6Al4V

被引：0

作者：

Wu, Hongbing ^{[1
]}

Jia, Zhixin ^{[1
]}

Zhang, Xuechang ^{[1
]}

Xu, Chenguang ^{[1
]}

机构：

[1] Zhejiang Univ, Ningbo Inst Technol, Ningbo 315100, Zhejiang, Peoples R China

来源：

ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2 | 2011年 / 37-38卷

关键词：

Titanium alloy; Drilling; Geometrical Shape; TEMPERATURE;

D O I：

10.4028/www.scientific.net/AMM.37-38.1283

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The quality of hole is difficult to be guaranteed and tools wear severely in the drilling process of titanium alloy. To investigate more efficient methods to improve the quality of holes, the drilling experiments of titanium alloy Ti6Al4V were carried out under different drilling speed and different feeding speed. The drilling force was achieved through the dynamometers in the experiment. Simultaneously, a series of drilling experiment of titanium alloy was carried out with the two different shape drills and three different diameter drills. The comparison of the achieved drilling force proved that the sharpened tool is better to guarantee the quality of hole for titanium alloy Ti6Al4V.

引用

页码：1283 / 1286

页数：4

共 6 条

[1] Dry drilling of alloy Ti-6Al-4V
Cantero, JL
Tardío, MM
Canteli, JA
Marcos, M
Miguélez, MH
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2005, 45 (11) : 1246 - 1255
[2] High-speed drilling performance of coated micro-drills with Zr-C:H:Nx% coatings
Kao, W. H.
[J]. WEAR, 2009, 267 (5-8) : 1068 - 1074
[3] High-throughput drilling of titanium alloys
Li, Rui
Hegde, Parag
Shih, Albert J.
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (01) : 63 - 74
[4] Modeling of twist drills wear by a temperature-dependent friction law
Nayebia, A.
Mauvoisin, G.
Vaghefpour, H.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 207 (1-3) : 98 - 106
[5] Sharif S., 2006, J MATER PROCESS TECH, V45, P146
[6] Analysis of temperature during drilling of Ti6Al4V with minimal quantity of lubricant
Zeilmann, Rodrigo Panosso
Weingaertner, Walter Lindolfo
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 179 (1-3) : 124 - 127

← 1 →