Preparation and characteristics of moulded biodegradable cellulose fibers/MPU-20 composites (CFMCs) by steam injection technology

In this work, the moulded cellulose fibers/MPU-20 composites (CFMCs) with apparent specific gravity lower than 100 kg/m(3) and thickness of 20-200 mm have been successfully manufactured using a new design of steam injection technology and equipment. It was found that the CFMCs have good cushioning properties, with a cushion factor lower than 4. Two yield deformation stages were observed in the compressive process. Compressive stress-strain and cushion factor-stain curves were measured as a function of steam injection pressure, transmission time, holding time, MPU-20 resin dosage and apparent specific gravity. Chemical groups, crystallinity, and thermal properties of samples were studied through the use of FTIR spectroscopy, X-ray diffraction (XRD), and DTA-TGA. In addition, the microstructure and morphology were investigated by scanning electron microscope (SEM) and atomic force microscope (AFM). (C) 2008 Elsevier Ltd. All rights reserved.