Finite-element modeling of the failure of interference-fit planet carrier and shaft assembly

被引：24
作者：
Hao, Dongsheng [1 ]
Wang, Delun [1 ]
机构：
[1] Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Liaoning Provin, Peoples R China
来源：
ENGINEERING FAILURE ANALYSIS | 2013年 / 33卷
关键词：
Interference-fit; Planet carrier; Finite element method; Contact problem; SHRINK; FATIGUE;
D O I：
10.1016/j.engfailanal.2013.04.029
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A planet carrier and shafts assembly with interference-fit was modeled based on 3-D finite element method by applying thermal loads to the shafts with orthotropic coefficients of thermal expansion. A 3-D finite element contact model verified that the contact pressure is identical compared with the calculated pressure by Lame's equations for the thick-wall cylinder interference-fit. A displacement history analysis by the 3-D finite element multi-contact simulation under alternate loads reveals the root cause for the interference-fit shafts coming out of the planet carrier after 65 h of planetary gear reducer working test. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：184 / 196
页数：13
相关论文
共 23 条
  • [11] Torque transmission capability of composite-metal interference fit joints
    Lee, Seung Woo
    Lee, Dai Gil
    [J]. COMPOSITE STRUCTURES, 2007, 78 (04) : 584 - 595
  • [12] Measurement of Torsionally Induced Shear Stresses in Shrink-Fit Assemblies
    Lewis, S. J.
    Hossain, S.
    Booker, J. D.
    Truman, C. E.
    Stuhr, U.
    [J]. EXPERIMENTAL MECHANICS, 2009, 49 (05) : 637 - 651
  • [13] A shrink-fitted peg subjected to a tensile load
    Mugadu, A
    Hills, DA
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2001, 43 (07) : 1629 - 1641
  • [14] Nishimura S, 2001, DESIGN METHODS FOR PERFORMANCE AND SUSTAINABILITY, P115
  • [15] Stress analysis of shrink-fitted joints for various fit forms via finite element method
    Özel, A
    Temiz, S
    Aydin, MD
    Sen, S
    [J]. MATERIALS & DESIGN, 2005, 26 (04): : 281 - 289
  • [16] Failure analysis of a planetary gear carrier of 1200HP transmission
    Park, Sunyoung
    Lee, Jongmin
    Moon, Uijun
    Kim, Deugjo
    [J]. ENGINEERING FAILURE ANALYSIS, 2010, 17 (02) : 521 - 529
  • [17] On shrink fit analysis and design
    Pedersen, P
    [J]. COMPUTATIONAL MECHANICS, 2006, 37 (02) : 121 - 130
  • [18] Contact indentations determined by a direct super finite element approach
    Pedersen, Pauli
    [J]. IUTAM Symposium on Multiscale Problems in Multibody System Contacts, 2007, 1 : 183 - 193
  • [19] A shrink-fit shaft subject to torsion
    Sackfield, A
    Barber, JR
    Hills, DA
    Truman, CE
    [J]. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2002, 21 (01) : 73 - 84
  • [20] Stress analysis of interference fitted shaft-hub system under transient heat transfer conditions
    Sen, S
    Aksakal, B
    [J]. MATERIALS & DESIGN, 2004, 25 (05) : 407 - 417
123