The change occurred in W/ZrC composite properties by using nano reactants

被引：15
作者：
Roosta, Mostafa [1 ]
Baharvandi, Hamidreza [2 ]
机构：
[1] Engn Res Inst, Tehran, Iran
[2] MUT Univ, Dept Mat Engn, Tehran, Iran
来源：
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2013年 / 37卷
关键词：
W/ZrC composite; Hot-pressing; Reaction sintering; Nano reactants; ELEVATED-TEMPERATURE STRENGTH; DISPLACIVE COMPENSATION; THERMOPHYSICAL PROPERTIES; MICROSTRUCTURE; DENSE;
D O I：
10.1016/j.ijrmhm.2012.10.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this article the effect of using nano reactants in the properties of W-ZrC composite fabricated by hot-press and reaction sintering has been evaluated. At first the W and ZrC powders were hot-pressed to produce W/ZrC composite and then the WC/ZrO2 and the WC/ZrSiO4 mixture were reaction sintered. The starting powders were selected in nano size to see the difference. In the case of using nano reactants the amount of unreacted and unwanted phases reduced and the reaction progressed better. Also the evaluated properties including density, hardness and modulus of elasticity are better in W/ZrC composite made by nano reactants. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：29 / 32
页数：4
相关论文
共 50 条
  • [21] Effect of TMAB and ZrC concentration on mechanical and morphological properties of Ni-B/ZrC composite electrodeposition
    Hukumdar, Omer
    Kumlu, Umut
    Keskin, Ali
    Akar, Mustafa A.
    MATERIALS TESTING, 2025, 67 (01) : 17 - 35
  • [22] In situ synthesis, microstructure and mechanical properties of nano-structured SiC-ZrC composite prepared by spark plasma sintering
    Yu, Lei
    Feng, Lun
    Lee, Sea-Hoon
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 738 : 301 - 306
  • [23] Novel low temperature derived Wf/W-ZrC-Cu composites by reactive infiltration with enhanced mechanical and thermal physical properties
    Wang, Dong
    Zhang, Yaning
    Xu, Kai
    Wei, Boxin
    Ding, Xiang
    Jin, Xing
    Ran, Songlin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 8065 - 8076
  • [24] Dense sub-micron-sized ZrC-W composite produced by reactive melt infiltration at 1200 °C
    Zhao, Yan-Wei
    Wang, Yu-Jin
    Peng, Hua-Xin
    Zhou, Yu
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 30 (01) : 196 - 199
  • [25] Pulsed electrodeposition and mechanical properties of Ni-W/SiC nano-composite coatings
    Wasekar, Nitin P.
    Latha, S. Madhavi
    Ramakrishna, M.
    Rao, D. S.
    Sundararajan, G.
    MATERIALS & DESIGN, 2016, 112 : 140 - 150
  • [26] Microstructure and mechanical properties of ZrC-TaC, composite fabricated by displacive compensation of porosity at 1300 °C
    Wu, Daren
    Geng Huangfu
    Dong Wang
    Wei, Boxin
    Wang, Yujin
    Yu Zhou
    CERAMICS INTERNATIONAL, 2018, 44 (01) : 246 - 253
  • [27] Microstructure and mechanical properties of intragranular W-Cu/TiC-ZrC composite prepared by reactive melt infiltration at 1300 °C
    Wang, Dong
    Wei, Boxin
    Wang, Yujin
    Song, Guiming
    Zhou, Yu
    MATERIALS CHARACTERIZATION, 2018, 138 : 89 - 97
  • [28] Novel nanocrystalline W-Cu-Cr-ZrC composite with ultra-high hardness
    Cao, Lijun
    Hou, Chao
    Li, Yurong
    Liu, Xuemei
    Liang, Shuhua
    Song, Xiaoyan
    NANOTECHNOLOGY, 2020, 31 (13)
  • [29] Effect of Ti Additives on the Sintering Behavior and Mechanical Properties of ZrC-W Composites
    Chen Lei
    Wang Yujin
    Zhou Yu
    Zhang Taiquan
    He Hui
    RARE METAL MATERIALS AND ENGINEERING, 2008, 37 : 556 - 559
  • [30] Fabrication of ZrC/ZrO2 composite continuous fibers with a radial gradient using pack carburizing
    Wang, Lin
    Xie, Yongshuai
    Ma, Dehua
    Zhu, Luyi
    Wang, Xinqiang
    Jin, Xiaotong
    Xu, Chonghe
    Peng, Ying
    Zhang, Guanghui
    Xu, Dong
    CERAMICS INTERNATIONAL, 2019, 45 (17) : 23037 - 23042
12345