The change occurred in W/ZrC composite properties by using nano reactants

被引：15
|
作者：
Roosta, Mostafa [1 ]
Baharvandi, Hamidreza [2 ]
机构：
[1] Engn Res Inst, Tehran, Iran
[2] MUT Univ, Dept Mat Engn, Tehran, Iran
来源：
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2013年 / 37卷
关键词：
W/ZrC composite; Hot-pressing; Reaction sintering; Nano reactants; ELEVATED-TEMPERATURE STRENGTH; DISPLACIVE COMPENSATION; THERMOPHYSICAL PROPERTIES; MICROSTRUCTURE; DENSE;
D O I：
10.1016/j.ijrmhm.2012.10.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this article the effect of using nano reactants in the properties of W-ZrC composite fabricated by hot-press and reaction sintering has been evaluated. At first the W and ZrC powders were hot-pressed to produce W/ZrC composite and then the WC/ZrO2 and the WC/ZrSiO4 mixture were reaction sintered. The starting powders were selected in nano size to see the difference. In the case of using nano reactants the amount of unreacted and unwanted phases reduced and the reaction progressed better. Also the evaluated properties including density, hardness and modulus of elasticity are better in W/ZrC composite made by nano reactants. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：29 / 32
页数：4
相关论文
共 50 条
  • [1] Microstructure and Properties of DCP-Derived W-ZrC Composite Using Nontoxic Sodium Alginate to Fabricate WC Preform
    Khoee, Ali Asghar Najafzadeh
    Habibolahzadeh, Ali
    Qods, Fathallah
    Baharvandi, Hamidreza
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (04) : 1641 - 1648
  • [2] The evaluation of W/ZrC composite fabricated through reaction sintering of two precursors: Conventional ZrO2/WC and novel ZrSiO4/WC
    Roosta, Mostafa
    Baharvandi, Hamidreza
    Abdizade, Hossein
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2011, 29 (06) : 710 - 715
  • [3] Precipitations of W/Cu metallic phases in ZrC in the reactive melt infiltrated ZrC/W composite
    Wang, Dong
    Chen, Hongtao
    Wang, Yujin
    Wei, Boxin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 843
  • [4] Microstructure and mechanical properties of ZrC-W matrix composite prepared by reactive infiltration at 1300 °C
    Zhao, Yan-Wei
    Wang, Yu-Jin
    Chen, Lei
    Zhou, Yu
    Song, Gui-Ming
    Li, Jun-Ping
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2013, 37 : 40 - 44
  • [5] Investigation of effect of acrylate gel maker parameters on properties of WC preforms for the production of W-ZrC composite
    Yaghobizadeh, Omid
    Baharvandi, Hamidreza
    Alizadeh, Ali
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 45 : 130 - 136
  • [6] Microstructure and properties of ZrC-W composite fabricated by reactive infiltration of Zr2Cu into WC/W preform
    Zhao, Yan-Wei
    Wang, Yu-Jin
    Jin, Xiu-Yu
    Jia, Peng
    Chen, Lei
    Zhou, Yu
    Song, Gui-Ming
    Li, Jun-Ping
    Feng, Zhi-Hai
    MATERIALS CHEMISTRY AND PHYSICS, 2015, 153 : 17 - 22
  • [7] Influence of ZrC content on the elevated temperature tensile properties of ZrCp/W composites
    Wang, Yujin
    Peng, Hua-Xin
    Zhou, Yu
    Song, Gui-Ming
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03): : 1805 - 1811
  • [8] Application of the statistical Taguchi method to optimize the properties of WC preforms to produce W-ZrC composites using reactive infiltration by molten Zr2 Cu
    Najafzadehkhoee, Aliasghar
    Habibolahzadeh, Ali
    Qods, Fathallah
    Vakhshouri, Maryam
    Polkowski, Wojciech
    Hvizdos, Pavol
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2020, 34 (26):
  • [9] Microstructures and properties of ultrafine grained W-ZrC composites
    Kim, Jae-Hee
    Park, Choongkwon
    Lim, Jaehyuk
    Kang, Shinhoo
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 623 : 282 - 289
  • [10] Fabrication and Ablation Behavior of Plasma Sprayed ZrC-W Composite Coatings
    Lu, Dan
    Niu, Yaran
    Ge, Xuelian
    Zheng, Xuebin
    Chen, Guang
    HIGH-PERFORMANCE CERAMICS VIII, 2014, 602-603 : 552 - 555
12345