Investigation on the Effect of Tool Pin Profiles on Mechanical and Microstructural Properties of Friction Stir Butt and Scarf Welded Aluminium Alloy 6063

被引：39
|
作者：
Goel, Pankul [1 ]
Siddiquee, Arshad Noor [2 ]
Khan, Noor Zaman [2 ]
Hussain, Mohd Azmal [3 ]
Khan, Zahid A. [2 ]
Abidi, Mustufa Haider [4 ]
Al-Ahmari, Abdulrahman [4 ]
机构：
[1] IMS Engn Coll, Dept Mech Engn, Natl Highway 24, Ghaziabad 201009, India
[2] Jamia Millia Islamia, Dept Mech Engn, New Delhi 110025, India
[3] Noida Inst Engn & Technol, Dept Mech Engn, Greater Noida 201306, Uttar Pradesh, India
[4] King Saud Univ, Adv Mfg Inst, Princess Fatima Alnijriss Res Chair Adv Mfg Techn, Riyadh 11421, Saudi Arabia
来源：
METALS | 2018年 / 8卷 / 01期
关键词：
friction stir welding; scarf joint; butt joint; tool pin profiles; mechanical properties; microstructure; metallurgy; DEFECT FORMATION; RESIDUAL-STRESS; SHOULDER DIAMETER; PARAMETERS; JOINTS; ZONE; PRECIPITATION; EVOLUTION; HARDNESS; PLATE;
D O I：
10.3390/met8010074
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, friction stir welding (FSW) of butt and scarf joints of Al 6063-T6 were investigated. Five different tool pin profiles (cylindrical, tapered cylindrical, square, triangular, and hexagonal) were applied for performing welding. Scarf joint, being a new joint configuration, was used and effect of pin profiles was investigated on this type of joint configuration. The effect of pin profiles on microstructure, micro-hardness, impact and tensile properties of friction stir welded Al 6063-T6 was investigated. Scanning electron and optical microscopy were employed to characterize the different zones of welded joints. A thorough discussion on correlation between mechanical properties and microstructure has been made. In addition, the formation of various defects during the FSW was discussed with the help of fractography of the fractured surfaces.
引用
收藏
页数：15
相关论文
共 50 条
  • [41] IMPROVING THE PARTICLE DISTRIBUTION AND MECHANICAL PROPERTIES OF FRICTION-STIR-WELDED COMPOSITES BY USING A SMOOTH PIN TOOL
    Liu, Huijie
    Hu, Yanying
    Zhao, Yunqiang
    Fujii, Hidetoshi
    MECHANICS OF COMPOSITE MATERIALS, 2017, 53 (04) : 515 - 524
  • [42] EFFECT OF PIN PROFILES ON THE MECHANICAL PROPERTIES OF FRICTION-STIR-WELDED AA5383 AND AA7075
    Kumar, Pandy Madhan
    Anbumalar, Veerabathiran
    MATERIALI IN TEHNOLOGIJE, 2020, 54 (01): : 3 - 9
  • [43] Influence of tool traverse speed on mechanical properties and fracture morphology of friction stir welded pure copper butt joints
    Chandra, Puspendu Chandra
    Mondal, Arpan Kumar
    Nirsanametla, Yadaiah
    Kumar, Ajay
    Chowdhury, Sohini
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2024,
  • [44] Influence of welding parameters and tool pin profile on microstructure and mechanical properties along the thickness in a friction stir welded aluminum alloy
    Xu, Weifeng
    Liu, Jinhe
    Zhu, Hongqiang
    Fu, Li
    MATERIALS & DESIGN, 2013, 47 : 599 - 606
  • [45] Effect of tool material on mechanical properties of friction stir welded dissimilar aluminium joints
    Mrudula, G.
    Bhargavi, P.
    Krishnaiah, A.
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 3306 - 3313
  • [46] Effect of Tool Pin Profiles Using Tungsten Carbide Tool on Microstructure and Tensile Properties of Friction Stir Welded AA 6082-T6 Thin Aluminium Alloy Joints
    Sameer, M. D.
    Birru, Anil Kumar
    ADVANCES IN ADDITIVE MANUFACTURING AND JOINING, AIMTDR 2018, 2020, : 475 - 486
  • [47] Weld appearance and microstructural characteristics of friction stir butt barrier welded joints of aluminium alloy to copper
    Liu, H. J.
    Shen, J. J.
    Xie, S.
    Huang, Y. X.
    Cui, F.
    Liu, C.
    Kuang, L. Y.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (02) : 104 - 110
  • [48] INVESTIGATION OF MICROSTUCTURAL AND MECHANICAL PROPERTIES OF FRICTION STIR WELDED Cu/Al-1050 BUTT JOINT
    Barlas, Zafer
    Uzun, Huseyin
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2010, 25 (04): : 857 - 865
  • [49] Effect of tool pin profile and dimensions on mechanical properties and microstructure of friction stir welded armor alloy
    Ghangas, Gyander
    Singhal, Sandeep
    MATERIALS RESEARCH EXPRESS, 2018, 5 (06):
  • [50] Microstructural characteristics and mechanical properties of friction stir welded cupronickel alloy
    Zhou L.
    Min J.
    Lei S.
    He W.
    Huang Y.
    Feng J.
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2019, 50 (04): : 814 - 820
12345