Optimal Design of GFRP-Plywood Variable Stiffness Plate

被引：8
|
作者：
Sliseris, Janis [1 ]
Frolovs, Girts [1 ]
Rocens, Karlis [1 ]
Goremikins, Vadims [1 ]
机构：
[1] Riga Tech Univ, Dept Struct Engn, Fac Bldg & Civil Engn, LV-1001 Riga, Latvia
来源：
MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES | 2013年 / 57卷
关键词：
Plywood; Glass fibre; fibre orientation; fibre concentration; minimal compliance; maximal buckling load; TOPOLOGY OPTIMIZATION; COMPOSITE; PANELS;
D O I：
10.1016/j.proeng.2013.04.134
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The new optimization methods of outer layer fibre directions and concentrations of plywood plate with glass fibre-epoxy outer layers are proposed. The first method minimizes structural compliance. It consists of two phases. The fibre directions are optimized in the first phase and concentrations in the second phase. The second method maximizes buckling load for the first buckling mode. The increase of stiffness is about 31% of plate with optimized fibre direction and concentration comparing to similar non-optimized plate. The buckling load of single span rectangular plate could be increased about 34% when optimized GFRP-plywood plate by proposed method. (C) 2013 The Authors. Published by Elsevier Ltd. Selection and peer-review under responsibility of the Vilnius Gediminas Technical University.
引用
收藏
页码：1060 / 1069
页数：10
相关论文
共 50 条
  • [21] Seismic performance of composite plate shear walls with variable column flexural stiffness
    Curkovic, Ivan
    Skejic, Davor
    Dzeba, Ivica
    De Matteis, Gianfranco
    STEEL AND COMPOSITE STRUCTURES, 2019, 33 (01) : 19 - 36
  • [22] A trimmed-NURBS-based thermal buckling isogeometric analysis framework for the variable stiffness plate with complex cutouts
    Ding, Haoqing
    Qian, Bingwen
    Hu, Yutao
    Wang, Changli
    Zhang, Xin
    Sun, Ruqi
    Xu, Bin
    ADVANCES IN ENGINEERING SOFTWARE, 2025, 199
  • [23] Stiffness design of plate/shell structures by evolutionary topology optimization
    Li, Baotong
    Liu, Honglei
    Yang, Zihui
    Zhang, Jinhua
    THIN-WALLED STRUCTURES, 2019, 141 : 232 - 250
  • [24] Design considerations for variable stiffness, doubly curved composite plates
    Thomas, Matthew A.
    Hallett, Stephen R.
    Weaver, Paul M.
    COMPOSITE STRUCTURES, 2020, 244
  • [25] Generating realistic laminate fiber angle distributions for optimal variable stiffness laminates
    van Campen, Julien M. J. F.
    Kassapoglou, Christos
    Gurdal, Zafer
    COMPOSITES PART B-ENGINEERING, 2012, 43 (02) : 354 - 360
  • [26] A review on the design of laminated composite structures: constant and variable stiffness design and topology optimization
    Xu, Yingjie
    Zhu, Jihong
    Wu, Zhen
    Cao, Yinfeng
    Zhao, Yubo
    Zhang, Weihong
    ADVANCED COMPOSITES AND HYBRID MATERIALS, 2018, 1 (03) : 460 - 477
  • [27] A review on the design of laminated composite structures: constant and variable stiffness design and topology optimization
    Yingjie Xu
    Jihong Zhu
    Zhen Wu
    Yinfeng Cao
    Yubo Zhao
    Weihong Zhang
    Advanced Composites and Hybrid Materials, 2018, 1 : 460 - 477
  • [28] Design of a Variable-Stiffness Compliant Skin for a Morphing Leading Edge
    Wang, Zhigang
    Yang, Yu
    APPLIED SCIENCES-BASEL, 2021, 11 (07):
  • [29] Design Optimization of Asymmetric Patterns for Variable Stiffness of Continuum Tubular Robots
    Park, Soyeon
    Kim, Jongwoo
    Kim, Chunwoo
    Cho, Kyu-Jin
    Noh, Gunwoo
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2022, 69 (08) : 8190 - 8200
  • [30] Design of variable-stiffness conical shells for maximum fundamental eigenfrequency
    Blom, Adriana W.
    Setoodeh, Shahriar
    Hol, Jan M. A. M.
    Gurdal, Zafer
    COMPUTERS & STRUCTURES, 2008, 86 (09) : 870 - 878
12345