Recent Improvement of the Design of the ITER Steady-State Magnetic Sensors

被引：12

作者：

Entler, S. ^{[1
]}

Kocan, M. ^{[2
]}

Duran, I. ^{[1
]}

Vayakis, G. ^{[2
]}

Lucca, F. ^{[3
]}

Vigano, F. ^{[3
]}

Cantu, R. ^{[3
]}

机构：

[1] CAS, Inst Plasma Phys, Tokamak Dept, Prague 18200 8, Liben, Czech Republic

[2] ITER Org, F-13067 St Paul Les Durance, France

[3] LT Calcoli, I-23807 Merate, Italy

来源：

IEEE TRANSACTIONS ON PLASMA SCIENCE | 2018年 / 46卷 / 05期

关键词：

Calibration; Hall effect devices; ITER; magnetic field measurement; measurement errors; HALL SENSORS;

D O I：

10.1109/TPS.2018.2795243

中图分类号：

O35 [流体力学]; O53 [等离子体物理学];

学科分类号：

070204 ; 080103 ; 080704 ;

摘要：

A recent improvement of the design of the ITER outer vessel steady-state magnetic field sensors (OVSS) is presented. OVSS features a pair of Hall sensors with a sensing layer made of bismuth. Sixty OVSS will be installed on the ITER vacuum vessel outer skin to perform an absolute measurement of magnetic field. The bismuth Hall sensor measurement is temperature dependent, and the maximum allowed OVSS error of 4-mT limits the error of the measurement of the Hall sensor temperature by an on-board thermocouple to be less than 0.28 degrees C. This error consists of the temperature difference between the thermocouple and Hall sensors, thermocouple calibration error, and thermocouple measurement error. The improved design of the sensor housing reduces the temperature difference between the thermocouple and the Hall sensors bellow 0.04 degrees C. Procedures of the calibration prior installation and in situ calibration will allow calibrating the on-board thermocouple with the error less than 0.06 degrees C. The thermocouple measurement error limit was determined as 0.27 degrees C in which case OVSS meets the maximum allowed error.

引用

页码：1276 / 1280

页数：5

共 10 条

[1]

[Anonymous], 2005, CERT AN STAND REF MA

[2] Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics [J].

Duran, Ivan ;

Entler, Slavomir ;

Kocan, Martin ;

Kohout, Michal ;

Viererbl, Ladislav ;

Musalek, Radomir ;

Chraska, Tomas ;

Vayakis, George .

FUSION ENGINEERING AND DESIGN, 2017, 123 :690-694

[3] Signal conditioning and processing for metallic Hall sensors [J].

Entler, S. ;

Duran, I. ;

Sladek, P. ;

Vayakis, G. ;

Kocan, M. .

FUSION ENGINEERING AND DESIGN, 2017, 123 :783-786

[4] Investigation of linearity of the ITER outer vessel steady-state magnetic field sensors at high temperature [J].

Entler, S. ;

Duran, I. ;

Kocan, M. ;

Vayakis, G. .

JOURNAL OF INSTRUMENTATION, 2017, 12

[5] Final design of the ITER outer vessel steady-state magnetic sensors [J].

Kocan, M. ;

Duran, I. ;

Entler, S. ;

Vayakis, G. ;

Carmona, J. M. ;

Gitton, P. ;

Guirao, J. ;

Gonzalez, M. ;

Iglesias, S. ;

Pascual, Q. ;

Sandford, G. ;

Vacas, C. ;

Walsh, M. ;

Walton, R. .

FUSION ENGINEERING AND DESIGN, 2017, 123 :936-939

[6]

Kocan M., 2016, 3Y6WPK ITER IDM

[7]

Kocan M., 2016, U2Z3PR ITER IDM

[8]

National Institute of Standards and Technology (NIST), 2017, TABL THERM VOLT COEF

[9]

Nieuwenhove R. V., 2003, TW3TPDCIRRCER EFDA I

[10]

Vayakis G., 2016, 3UYQGX ITER IDM

← 1 →