A NOVEL PREPARATION ROUTE FOR ELECTROLESS COPPER PLATING ON SURFACE OF CaCO3 POWDERS

被引：1

作者：

Chen, Zhenming ^{[1
]}

Zhou, Shoufa ^{[2
]}

Zhang, Yajun ^{[3
]}

Huang, Mengru ^{[3
]}

Wan, Le ^{[3
]}

Li, Yang ^{[3
]}

Huang, Junjun ^{[2
,3
]}

机构：

[1] Hezhou Univ, Guangxi Key Lab Calcium Carbonate Resources Compr, Coll Mat & Environm Engn, Hezhou Ctiy 542899, Peoples R China

[2] Hefei Lucky & Technol Ind Co Ltd, Hefei 230041, Anhui, Peoples R China

[3] Hefei Univ, Dept Chem & Mat Engn, Hefei 230601, Anhui, Peoples R China

来源：

SURFACE REVIEW AND LETTERS | 2019年 / 26卷 / 05期

关键词：

Conductive coating; CaCO3; powders; electroless plating; surface modification;

D O I：

10.1142/S0218625X1850186X

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

In this work, electroless copper plating on the surface of CaCO3 powders modified with hydrophobic and hydrophilic coating was developed in that order. It was found that the surface structure of modified CaCO3 powders could absorb Sn2+ and then reduce Ag+. The Ag atoms were used as catalysts for the electroless face-centered copper crystallites plating on the CaCO3 surface. The compact and uniform copper particles were plated on the CaCO3 surface. The plated coating has a two-layer structure. The size of copper particles in the first layer was around 20 nm, the one in surface layer was around 100 nm. The lowest volume resistivity of conductive coating was 6.2 x 10(-2) Omega.cm.

引用

页数：5

共 17 条

[1] Superhydrophobic and oleophilic calcium carbonate powder as a selective oil sorbent with potential use in oil spill clean-ups [J].

Arbatan, Tina ;

Fang, Xiya ;

Shen, Wei .

CHEMICAL ENGINEERING JOURNAL, 2011, 166 (02) :787-791

[2] Site-selective electroless plating of copper on a poly(ethylene terephthalate) surface modified with a self-assembled monolayer [J].

Cao, Jiali ;

Wu, Zhongkui ;

Yang, Jun ;

Li, Shaoying ;

Tang, Hongxiao ;

Xie, Guangyong .

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2012, 415 :374-379

[3] Selective adsorption of catalyst and copper plating for additive fabrication of conductive patterns and through-holes [J].

Chang, Yu ;

Tao, Yu ;

Zhang, Qun ;

Yang, Zhen-Guo .

ELECTROCHIMICA ACTA, 2015, 158 :7-12

[4] Studies on the influence of surface pre-treatments on electroless copper coating of boron carbide particles [J].

Deepa, J. P. ;

Resmi, V. G. ;

Rajan, T. P. D. ;

Pavithran, C. ;

Pai, B. C. .

APPLIED SURFACE SCIENCE, 2011, 257 (17) :7466-7474

[5] Electroless deposition and some properties of Ni-Cu-P and Ni-Sn-P coatings [J].

Georgieva, J. ;

Armyanov, S. .

JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2007, 11 (07) :869-876

[6] Characterization of hydrothermally treated wood in relation to changes on its chemical composition and physical properties [J].

Herrera, Rene ;

Erdocia, Xabier ;

Llano-Ponte, Rodrigo ;

Labidi, Jalel .

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2014, 107 :256-266

[7] Method for electroless nickel plating on the surface of CaCO3 powders [J].

Huang, Junjun ;

Chen, Zhenming .

RSC ADVANCES, 2017, 7 (41) :25622-25626

[8] Influencing factors on the uniformity of copper coated nano-Al2O3 powders prepared by electroless plating [J].

Ling, GP ;

Li, Y .

MATERIALS LETTERS, 2005, 59 (13) :1610-1613

[9] Preparation of nickel-coated tungsten carbide powders by room temperature ultrasonic-assisted electroless plating [J].

Luo, Laima ;

Wu, Yucheng ;

Li, Jian ;

Zheng, Yuchun .

SURFACE & COATINGS TECHNOLOGY, 2011, 206 (06) :1091-1095

[10] Preparation and characterization of Ni-coated Cr3C2 powder by room temperature ultrasonic-assisted electroless plating [J].

Luo, Laima ;

Yu, Jia ;

Luo, Juan ;

Li, Jian .

CERAMICS INTERNATIONAL, 2010, 36 (06) :1989-1992

← 1 2 →