Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP)

被引：59

作者：

Gillet, V. ^{[1
,3
]}

Aubignat, E. ^{[2
]}

Costil, S. ^{[2
]}

Courant, B. ^{[3
]}

Langlade, C. ^{[2
]}

Casari, P. ^{[3
]}

Knapp, W. ^{[4
]}

Planche, M. P. ^{[2
]}

机构：

[1] CLFA, Paris, France

[2] Univ Bourgogne Franche Comte, UTBM, UMR6303, ICB,LERMPS, F-90100 Belfort, France

[3] Univ Nantes, Inst Rech Genie Civil & Mecan, CNRS, UMR 6183, St Nazaire, France

[4] Fraunhofer Inst Lasertech ILT, Aachen, Germany

来源：

SURFACE & COATINGS TECHNOLOGY | 2019年 / 364卷

关键词：

Low pressure cold spray; Copper coating; Composite material; PEEK; Carbon fibers; METALLIC COATINGS; POLYETHERETHERKETONE; DEPOSITION; COMPOSITE;

D O I：

10.1016/j.surfcoat.2019.01.011

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A new method which allows the development of Low Pressure Cold Sprayed copper coatings on PEEK (PolyEther-Ether-Ketone) based composites reinforced by carbon fibers is investigated. Due to the solid state and high velocities of impacting particles, cold spraying involves a high erosion on composite materials, leading to an absence of coatings and sometimes damaged carbon fibers. As a result, few dozen micrometers of pure PEEK matrix have been added on the surface of the composite to act as an interfacial layer between composite and coating. Optimization of the LPCS parameters has been carried out, using a careful choice of powder size distribution in order to avoid substrate damage, erosion and coating delamination. Dense copper coatings exceeding 100 mu m thick have been obtained. SEM observations have been carried out to evaluate the microstructure of coatings, and the minimal required matrix thickness regarding the size distribution of the powder.

引用

页码：306 / 316

页数：11

共 50 条

[21] Residual Stress Analysis of Cold-Sprayed Copper Coatings by Numerical Simulation
Li, Wenya
Yang, Kang
Zhang, Dongdong
Zhou, Xianglin
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2016, 25 (1-2) : 131 - 142
[22] Strain-hardening fiber reinforced polymer concrete with a low carbon footprint
Farooq, Mohammed
Banthia, Nemkumar
CONSTRUCTION AND BUILDING MATERIALS, 2022, 314
[23] Cold-sprayed copper and tantalum coatings - Detailed FESEM and TEM analysis
Koivuluoto, Heli
Honkanen, Mari
Vuoristo, Petri
SURFACE & COATINGS TECHNOLOGY, 2010, 204 (15) : 2353 - 2361
[24] The Influence of Powder Particle Velocity and Microstructure on the Properties of Cold Sprayed Copper Coatings
Venkatesh, L.
Chavan, Naveen M.
Sundararajan, G.
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2011, 20 (05) : 1009 - 1021
[25] Residual Stress Analysis of Cold-Sprayed Copper Coatings by Numerical Simulation
Wenya Li
Kang Yang
Dongdong Zhang
Xianglin Zhou
Journal of Thermal Spray Technology, 2016, 25 : 131 - 142
[26] Prospects of Low-Pressure Cold Spray for Superhydrophobic Coatings
Gibas, Anna
Baszczuk, Agnieszka
Jasiorski, Marek
Winnicki, Marcin
COATINGS, 2019, 9 (12)
[27] Investigation of crevice corrosion of metallic fastened joints in carbon fiber reinforced polymer (CFRP) exposed to coastal seawater
Abdulsalam, Mohammed, I
Presuel-Moreno, Francisco
ANTI-CORROSION METHODS AND MATERIALS, 2021, 68 (03) : 238 - 247
[28] Micro drilling of carbon fiber reinforced polymer
Basso, Igor
Batista, Marcelo Ferreira
Jasinevicius, Renato Goulart
Campos Rubio, Juan Carlos
Rodrigues, Alessandro Roger
COMPOSITE STRUCTURES, 2019, 228
[29] Investigation of Burst Pressure on Carbon/Glass Fiber Reinforced Polymer Metal Tube for High Pressure Applications
Sumana, B. G.
Sagar, Vidya H. N.
Krishna, M.
Rajkumar, G. R.
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 535 - 539
[30] Feasibility study of carbon-fiber reinforced polymer linerless pressure vessel tank
Sundharesan, R.
Kumar, Sai Prasanna J., V
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2025, 239 (02) : 108 - 122

← 1 2 3 4 5 →