Influences of titanium and manganese on high strength low alloy SAW weld metal properties

被引：64

作者：

Beidokhti, B. ^{[1
]}

Koukabi, A. H. ^{[1
]}

Dolati, A. ^{[1
]}

机构：

[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran, Iran

来源：

MATERIALS CHARACTERIZATION | 2009年 / 60卷 / 03期

关键词：

Manganese; Titanium; Acicular Ferrite; Toughness; PIPELINE STEELS; HYDROGEN; MICROSTRUCTURE; MOLYBDENUM; TOUGHNESS; CHROMIUM; DEPOSITS; ELEMENTS; STRAIN; IRON;

D O I：

10.1016/j.matchar.2008.09.005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The objective of this work was to study the influence of titanium on API SL-X70 steel weld metal properties at manganese levels of 1.4 and 2%. The best mechanical properties in the weld series were obtained in two compositions, i.e. 1.92%Mn-0.02%Ti and 1.40%Mn-0.08%Ti. in both groups of welds, acicular ferrite in the microstructure was increased with addition of titanium in the range of 0.02-0.08%. Manganese helped to refine and homogenize weld microstructures. Increased hardenability of the weld due to further addition of titanium or manganese encouraged grain boundary nucleation of bainite with greater frequency than intragranular nucleation of acicular ferrite. Also, the amount of manganese in inclusions was decreased with the addition of titanium to the weld. The impact toughness of the weld metal was improved by addition of titanium, but beyond the optimal titanium percentage, the quasi-cleavage fracture mode appeared in the specimens again. (C) 2008 Elsevier Inc. All rights reserved

引用

页码：225 / 233

页数：9

共 29 条

[1]

ARNOLDY RF, 1967, WELD J, V46, P117

[2]

ARONSON HJ, 1960, MET SOC AIME S DEC A

[3] INFLUENCE OF ALLOYING ELEMENTS AND HEAT-TREATMENT ON IMPACT TOUGHNESS OF CHROMIUM STEEL SURFACE DEPOSITS [J].

BARBANGELO, A .

JOURNAL OF MATERIALS SCIENCE, 1990, 25 (06) :2975-2984

[4] Effect of nickel and molybdenum additions on weld metal toughness in a submerged arc welded HSLA line-pipe steel [J].

Bhole, SD ;

Nemade, JB ;

Collins, L ;

Liu, C .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 173 (01) :92-100

[5] Effects of alloying elements on the microstructure and inclusion formation in HSLA multipass welds [J].

Bose-Filho, W. W. ;

Carvalho, A. L. M. ;

Strangwood, M. .

MATERIALS CHARACTERIZATION, 2007, 58 (01) :29-39

[6]

BOSEFILHO WW, 1995, THESIS U BIRMINGHAM

[7]

CHOI CL, 1978, WELD J, V57, pS232

[8] Slow strain rate corrosion and fracture characteristics of X-52 and X-70 pipeline steels [J].

Contreras, A ;

Albiter, A ;

Salazar, A ;

Pérez, R .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 407 (1-2) :45-52

[9] Microstructural analysis of a single pass 2.25% Cr-1.0% Mo steel weld metal with different manganese contents [J].

de Souza, LFG ;

Bott, ID ;

Jorge, JCF ;

Guimaraes, AS ;

Paranhos, RPR .

MATERIALS CHARACTERIZATION, 2005, 55 (01) :19-27

[10]

Dixon B., 1996, INT J JOIN MAT, V8, P14

← 1 2 3 →