Experimental investigation on mass flow characteristics of electronic expansion valves with R22, R410A and R407C

被引：17

作者：

Chen Liang ^{[1
]}

Chen Jiangping ^{[1
]}

Liu Jinghui ^{[1
]}

Chen Zhijiu ^{[1
]}

机构：

[1] Shanghai Jiao Tong Univ, Sch Mech Engn, Shanghai 200240, Peoples R China

来源：

ENERGY CONVERSION AND MANAGEMENT | 2009年 / 50卷 / 04期

关键词：

Electronic expansion valve; Mass flow characteristics; Metastability; Flashing inception; Refrigeration; FLASHING MECHANISMS;

D O I：

10.1016/j.enconman.2008.12.018

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A novel model depicting mass flow characteristics of electronic expansion valves (EEVs) is developed based on Bernoulli equation. Different from some conventional models using the two-phase outlet pressure and corrected flow coefficient, the new model considers metastable phenomenon caused by rapid depressurization and employs the pressure at throat of EEVs and the single-phase incompressible flow coefficient. Based on experimental data, a set of empirical correlations for the pressure calculation are developed for R22 and its substitutes, R407C and R410A. The relative deviations of mass flow rate predicted by the present model to the measured data are ranged from -6.12% to +7.50% for R22, and from -9.56% to +9.94% for R410A, and from -13.19% to +16.75% for R407C. The theoretical analyses and predicting results for flow characteristics of EEVs show that the new model is better than other conventional models. (c) 2008 Elsevier Ltd. All rights reserved.

引用

页码：1033 / 1039

页数：7

共 20 条

[1]

AARON AA, 1990, ASHRAE T, V96, P729

[2] CRITICAL FLASHING FLOWS IN NOZZLES WITH SUBCOOLED INLET CONDITIONS [J].

ABUAF, N ;

JONES, OC ;

WU, BJC .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1983, 105 (02) :379-383

[3]

ALAMGIR MD, 1981, ASME, V103, P52

[4]

ASHRAE, 1986, ASHRAE Standard 41.1: Standard Method for Temperature Measurement

[5]

*ASHRAE, 1989, 413 ASHRAE

[6]

BROWN RA, 1961, UCRL6665T USAEC

[7]

DAVIES A, 1973, ASHRAE T 1, V79

[8]

KIM Y, 1993, AES ASME, V29, P1

[9] A new model for depicting mass flow rate characteristic of electronic expansion valves [J].

Liu, Jinghui ;

Chen, Jiangping ;

Ye, Qifang ;

Chen, Zhijiu .

EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2007, 32 (01) :214-219

[10] Experimental research on refrigerant mass flow coefficient of electronic expansion valve [J].

Ma, SW ;

Zhang, C ;

Chen, JP ;

Chen, ZJ .

APPLIED THERMAL ENGINEERING, 2005, 25 (14-15) :2351-2366

← 1 2 →