Surface microstructure profilometry based on laser confocal feedback

demonstrate a surface microstructure profile measurement method, which utilizes the positioning ability of confocal technology and the high sensitivity of frequency-shift feedback of a microchip laser. The surface profile is measured by combination of the amplitude and phase information of the feedback light reflected by the sample. The amplitude information is used for coarse measurement and to determine the integral number of half lasing wavelengths contained in the sample profile variation. The phase information is used for fine measurement and to determine the fractional number. The measurement realizes both a large axial measuring range of tens of microns and a high axial resolution of similar to 2 nm. Meanwhile, a heterodyne phase measurement approach is introduced to compensate for environmental disturbance and to realize high axial resolution measurement under common room conditions. The surface profile of a grating is measured and proves the feasibility of the method. (C) 2015 AIP Publishing LLC.