Sintering behavior and mechanical properties of spark plasma sintered β-SiAION/TiN nanocomposites

被引：17

作者：

Nekouee, Kh. A. ^{[1
]}

Khosroshahi, R. A. ^{[1
]}

机构：

[1] Sahand Univ Technol, Fac Mat Engn, Tabriz, Iran

来源：

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2016年 / 61卷

关键词：

beta-SIAION/TIN nanocomposites; Mechanical alloying; Spark plasma sintering; Mechanical properties; HOT-PRESSING PARAMETERS; SIALON CERAMICS; SILICON-NITRIDE; ZRB2-BASED COMPOSITES; FRACTURE-TOUGHNESS; WEAR PROPERTIES; MICROSTRUCTURE; DENSIFICATION; TEMPERATURE; FABRICATION;

D O I：

10.1016/j.ijrmhm.2016.08.002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, fully dense beta-SiAION/TiN composites were produced by Spark Plasma Sintering (SPS) method. Si3N4, Al2O3, AIN and TiO2 powders were used as precursors. Starting powders were mixed with high energy ball milling and then were sintered by SPS method (at 1750 degrees C under pressure of 30 MPa for 12 min.). The milled powders had an average particle size of below similar to 155 nm. The XRD patterns of SPS-ed composites showed that the entire beta-SiAION phase constituent was in the form of Si4Al2O2N6 phase and cubic TiN phase can be formed by the phase transformation of TiO2 in relation with other precursors. FESEM micrographs confirmed that TiN particles were distributed homogeneously throughout beta-SiAION matrix. Mechanical properties evaluation revealed that by adding micro sized TiO2, optimal mechanical properties with a hardness similar to 14.6 GPa and a fracture toughness similar to 63 MPa m(1/2) were obtained. The improvement in the fracture toughness was attributed to the presence of the crack deflection as the dominant toughening mechanism in the SPS-ed beta-SiAION/riN composites. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：6 / 12

页数：7

共 53 条

[51] SiAlON ceramics from nanopowders [J].