Geometric design and energy absorption of a new deployable cylinder tube

被引：39

作者：

Wang, Qiang ^{[1
,2
]}

Li, Shiqiang ^{[1
]}

Liu, Zhifang ^{[1
]}

Wu, Guiying ^{[1
]}

Lei, Jianyin ^{[1
]}

Wang, Zhihua ^{[1
,2
]}

机构：

[1] Taiyuan Univ Technol, Coll Mech & Vehicle Engn, Inst Appl Mech, 79 Yingze St, Taiyuan 030024, Peoples R China

[2] Taiyuan Univ Technol, Shanxi Key Lab Mat Strength & Struct Impact, Taiyuan, Peoples R China

来源：

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2022年 / 29卷 / 13期

基金：

中国国家自然科学基金;

关键词：

Axial crushing; deformation mode; energy absorption; thin-walled tubes; THIN-WALLED TUBES;

D O I：

10.1080/15376494.2020.1846099

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A new prefolded tube is proposed by introducing web into a thin-walled tube based on "Miura origami". The quasi-static compression analysis of this tube shows that the web has an important influence on deformation mode and energy absorption. Compared with a circular tube, the new thin-walled tube not only maintains the superior performance of low initial peak force and induced deformation mode, but also has a better energy absorption capacity. The influences of the number of units, edges, and prefolding angle on the deformation process of the new thin-walled tube are determined through parameter analysis. An optimized structure is designed, and the initial peak force is reduced. The energy absorption of the new structure under quasi-static compression is also theoretically analyzed, and the theoretical results are in good agreement with the numerical simulation results.

引用

页码：1911 / 1924

页数：14

共 26 条

[1]

Abramowicz W., 1986, INT J IMPACT ENG, V4, P243, DOI [10.1016/0734-743X(86)90017-5, DOI 10.1016/0734-743X(86)90017-5]

[2]

Abramowicz W., 1984, INT J IMPACT ENG, V2, P263

[3]

Abramowicz W., 1984, Int. J. Impact Eng, V2, P179, DOI [10.1016/0734-743X(84)90005-8, DOI 10.1016/0734-743X(84)90005-8]

[4]

Alexander J., 1960, Q J MECH APPL MATH, V13, P1

[5] Geometric design and mechanical behavior of a deployable cylinder with Miura origami [J].

Cai, Jianguo ;

Deng, Xiaowei ;

Feng, Jian ;

Zhou, Ya .

SMART MATERIALS AND STRUCTURES, 2015, 24 (12)

[6] Geometric Analysis of a Foldable Barrel Vault With Origami [J].

Cai, Jianguo ;

Xu, Yixiang ;

Feng, Jian .

JOURNAL OF MECHANICAL DESIGN, 2013, 135 (11)

[7] Quasi-static axial compression of thin-walled circular aluminium tubes [J].

Guillow, SR ;

Lu, G ;

Grzebieta, RH .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2001, 43 (09) :2103-2123

[8]

Lu G., 2003, Energy absorption of structures and materials

[9]

Ma J., 2011, Thin-walled tubes with pre-folded origami patterns as energy absorption devices

[10] Quasi-static axial crushing of hexagonal origami crash boxes as energy absorption devices [J].

Ma, Jiayao ;

Dai, Huaping ;

Shi, Mengyan ;

Yuan, Lin ;

Chen, Yan ;

You, Zhong .

MECHANICAL SCIENCES, 2019, 10 (01) :133-143

← 1 2 3 →