Evaluation of Biomimetic Solution for Coating Powder Metallurgy Porous Titanium Samples

被引：0
作者：
de Medeiros, W. S. [1 ]
de Oliveira, M. V. [2 ]
Granjeiro, J. M. [1 ]
机构：
[1] Ctr HUAP UFF, Rua Marques Parana 303-4, BR-24033900 Niteroi, RJ, Brazil
[2] INT, BR-20081312 Rio De Janeiro, Brazil
来源：
ADVANCED POWDER TECHNOLOGY VI | 2008年 / 591-593卷
关键词：
Powder Metallurgy; Porous Titanium; Biomimetic Coating;
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In order to improve implant-bone attachment, porous titanium has been used to achieve the ingrowth of bone tissue within the porous structure. Although this biomaterial has shown efficient bone adhesion for orthopedic and dental implants, the ideal surface must have chemical bonds at the implant-bone interface. In this work, samples of pure porous titanium were produced by powder metallurgy technique and submitted to biomimetic process in order to evaluate the material's bioactivity and to enhance its osteoconductivity. The samples were immersed in modified simulated body fluid (mSBF) which induces the nucleation and growth of a calcium phosphate bioactive film and a chemical bond with titanium. SEM, EDX and FTIR analyses showed that a calcium phosphate deposition occurred without the need of pre-treatments to increase the surface bioactivity. As a result, this research revealed the potential for obtaining a bonelike apatite film on this porous titanium by biomimetic method.
引用
收藏
页码：703 / +
页数：2
相关论文
共 16 条
[1]   Influence of ionic strength and carbonate on the Ca-P coating formation from SBFx5 solution [J].
Barrere, F ;
van Blitterswijk, CA ;
de Groot, K ;
Layrolle, P .
BIOMATERIALS, 2002, 23 (09) :1921-1930
[2]  
Biasotto M, 2003, J Appl Biomater Biomech, V1, P172
[3]  
GERMAN RM, 1994, METAL POWDER IND FED, P406
[4]   Biological performance of uncoated and octacalcium phosphate-coated Ti6A14V [J].
Habibovic, P ;
Li, JP ;
van der Valk, CM ;
Meijer, G ;
Layrolle, P ;
van Blitterswijk, CA ;
de Groot, K .
BIOMATERIALS, 2005, 26 (01) :23-36
[5]   Biomimetic hydroxyapatite coating on metal implants [J].
Habibovic, P ;
Barrère, F ;
van Blitterswijk, CA ;
de Groot, K ;
Layrolle, P .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2002, 85 (03) :517-522
[6]  
Jones FH, 2001, SURF SCI REP, V42, P79
[7]   How useful is SBF in predicting in vivo bone bioactivity? [J].
Kokubo, T ;
Takadama, H .
BIOMATERIALS, 2006, 27 (15) :2907-2915
[8]   Fabrication of fully porous and porous-surfaced Ti-6Al-4V implants by electro-discharge-sintering of spherical Ti-6Al-4V powders in an one-step process [J].
Lee, W. H. ;
Hyun, C. Y. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 189 (1-3) :219-223
[9]   Apatite formation on porous titanium by alkali and heat-treatment [J].
Liang, FH ;
Zhou, L ;
Wang, KG .
SURFACE & COATINGS TECHNOLOGY, 2003, 165 (02) :133-139
[10]  
Medeiros WS, 2006, MATER SCI FORUM, V530-531, P569, DOI 10.4028/www.scientific.net/MSF.530-531.569
12