Finite element level validation of an anisotropic hysteresis model for non-oriented electrical steel sheets

被引：4

作者：

Upadhaya, Brijesh ^{[1
]}

Rasilo, Paavo ^{[2
]}

Handgruber, Paul ^{[3
]}

Belahcen, Anouar ^{[1
]}

Arkkio, Antero ^{[1
]}

机构：

[1] Aalto Univ, Dept Elect Engn & Automation, FI-00076 Espoo, Finland

[2] Tampere Univ, Unit Elect Engn, FI-33014 Tampere, Finland

[3] Graz Univ Technol, Inst Fundamentals & Theory Elect Engn, A-8010 Graz, Austria

来源：

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2022年 / 564卷

关键词：

Finite element analysis; Jiles-Atherton; Magnetic anisotropy; Magnetic hysteresis; Non-oriented silicon steel; MAGNETIC-FIELD; MAGNETOELASTIC BEHAVIOR; VECTOR; DEPENDENCE;

D O I：

10.1016/j.jmmm.2022.169978

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents the finite element level validation of the anisotropic Jiles-Atherton hysteresis model. Numerical analysis of a round rotational single sheet tester is performed using the 2D finite element method. Anisotropic extension of the Jiles-Atherton hysteresis model is coupled with the 2D finite element method. The finite element simulations are performed for the cases when the magnetic field alternates and rotates in the lamination plane. The simulated results for alternating and rotational flux density excitations agree with the measured data. The measured data used in this paper corresponds to the M400-50A nonoriented silicon steel.

引用

页数：11

共 44 条

[1] Can rotational magnetization be theoretically assessed? [J].

Appino, C. ;

Ragusa, C. ;

Fiorillo, F. .

INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2014, 44 (3-4) :355-370

[2] CALCULATION OF THE ROTATIONAL POWER LOSS IN ELECTRICAL STEEL LAMINATIONS FROM MEASURED (H)OVER-RIGHT-ARROW AND (B)OVER-RIGHT-ARROW [J].

ATALLAH, K ;

HOWE, D .

IEEE TRANSACTIONS ON MAGNETICS, 1993, 29 (06) :3547-3549

[3]

Bastos J. P. A., 2003, ELECTROMAGNETIC MODE, V1st, DOI 10.1201/9780203911174

[4] Experimental testing of an anisotropic vector hysteresis model [J].

Bergqvist, A ;

Lundgren, A ;

Engdahl, G .

IEEE TRANSACTIONS ON MAGNETICS, 1997, 33 (05) :4152-4154

[5] A simple vector generalization of the Jiles-Atherton model of hysteresis [J].

Bergqvist, AJ .

IEEE TRANSACTIONS ON MAGNETICS, 1996, 32 (05) :4213-4215

[6] Effect of Stress on Magnetic Hysteresis Losses in a Switched Reluctance Motor: Application to Stator and Rotor Shrink Fitting [J].

Bernard, Laurent ;

Daniel, Laurent .

IEEE TRANSACTIONS ON MAGNETICS, 2015, 51 (09)

[7] A JILES-ATHERTON AND FIXED-POINT COMBINED TECHNIQUE FOR TIME-PERIODIC MAGNETIC-FIELD PROBLEMS WITH HYSTERESIS [J].

CHIAMPI, M ;

CHIARABAGLIO, D ;

REPETTO, M .

IEEE TRANSACTIONS ON MAGNETICS, 1995, 31 (06) :4306-4311

[8] Anisotropic properties of non-oriented steel sheets [J].

Chwastek, Krzysztof .

IET ELECTRIC POWER APPLICATIONS, 2013, 7 (07) :575-579

[9] Reversible magneto-elastic behavior: A multiscale approach [J].

Daniel, Laurent ;

Hubert, Olivier ;

Buiron, Nicolas ;

Billardon, Rene .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2008, 56 (03) :1018-1042

[10] A multiscale model for magneto-elastic behaviour including hysteresis effects [J].

Daniel, Laurent ;

Rekik, Mahmoud ;

Hubert, Olivier .

ARCHIVE OF APPLIED MECHANICS, 2014, 84 (9-11) :1307-1323

← 1 2 3 4 5 →