Effects of Co and Ti on microstructure and mechanical behavior of Al0.75FeNiCrCo high entropy alloy prepared by mechanical alloying and spark plasma sintering

被引：104
作者：
Chen, Zhen [1 ]
Chen, Weiping [1 ]
Wu, Bingyong [1 ]
Cao, Xueyang [1 ]
Liu, Lusheng [1 ]
Fu, Zhiqiang [1 ]
机构：
[1] S China Univ Technol, Sch Mech & Automot Engn, Guangzhou 510640, Guangdong, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2015年 / 648卷
基金：
中国国家自然科学基金;
关键词：
High entropy alloys; Mechanical alloying; Spark plasma sintering; Cobalt; Titanium; Microstructure; STRENGTHENING MECHANISMS; SOLID-SOLUTION; CONSOLIDATION; PHASE; ELEMENTS; STABILITY; SYSTEM; GLASS; HEAT;
D O I：
10.1016/j.msea.2015.08.056
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effects of Co removal and Ti addition on the microstructure and mechanical behavior of a high-entropy alloy (HEA), Al0.75FeNiCrCo, were studied systematically. Al0.75FeNiCrCo, Al0.75FeNiCr and Al0.75FeNiCrCoTi0.25 were successfully prepared by the combination of mechanical alloying (MA) and spark plasma sintering (SPS). During the MA process, a primary body-centered cubic (BCC) supersaturated solid-solution phase and a face-centered cubic (FCC) supersaturated solid-solution phase were formed in each of the three investigated alloys. Removing Co from the Al0.75FeNiCrCo HEA or adding Ti into the Al0.75FeNiCrCo HEA could facilitate increasing the content of BCC phase both during the MA process and after the SPS process. Following SPS, bulk Al0.75FeNiCrCo was composed of a major FCC phase (similar to 79 vol%) and a minor BCC phase (similar to 21 vol%). However, with Co removal, bulk Al0.75FeNiCr alloy exhibited a main BCC phase (similar to 60 vol%) and an FCC phase (similar to 40 vol%). With Ti addition, bulk Al0.75FeNiCrCoTi0.25 alloy consisted of a major FCC phase (similar to 77 vol%) and a minor BCC phase (similar to 23 vol%). The EDS/TEM results of the bulk Al0.75FeNiCrCo alloy revealed that the BCC phase was enriched in while the FCC phase was enriched in Fe-Cr-Co. Meanwhile, a small fraction of nanoscale twins were present in the bulk Al(0.75F)eNiCrCo alloy. The bulk Al0.75FeNiCrCo alloy exhibited high strength and high hardness, mainly attributed to solid-solution strengthening, twin-boundary strengthening and grain-boundary strengthening. With Co removal, the bulk Al0.75FeNiCr alloy showed lower strength, hardness and ductility in comparison with the Al0.75FeNiCrCo alloy. With Ti addition, compared to the Al0.75FeNiCrCo alloy, the bulk Al0.75FeNiCrCoTi0.25 alloy exhibited higher strength and hardness with a slightly lower ductility. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：217 / 224
页数：8
相关论文
共 59 条
[1]  
[Anonymous], 2009, ASTM Standard E9-09
[2]   Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy [J].
Chen, Weiping ;
Fu, Zhiqiang ;
Fang, Sicong ;
Xiao, Huaqiang ;
Zhu, Dezhi .
MATERIALS & DESIGN, 2013, 51 :854-860
[3]   Competition between elements during mechanical alloying in an octonary multi-principal-element alloy system [J].
Chen, Yu-Liang ;
Hu, Ya-Huei ;
Hsieh, Cheng-An ;
Yeh, Jien-Wei ;
Chen, Swe-Kai .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 481 (1-2) :768-775
[4]   Glass formation in a high entropy alloy system by design [J].
Cunliffe, Andrew ;
Plummer, John ;
Figueroa, Ignacio ;
Todd, Iain .
INTERMETALLICS, 2012, 23 :204-207
[5]   High entropy Ti20Zr20Cu20Ni20Be20 bulk metallic glass [J].
Ding, H. Y. ;
Yao, K. F. .
JOURNAL OF NON-CRYSTALLINE SOLIDS, 2013, 364 :9-12
[6]   Effect of vanadium addition on the microstructure and properties of AlCoCrFeNi high entropy alloy [J].
Dong, Yong ;
Zhou, Kaiyao ;
Lu, Yiping ;
Gao, Xiaoxia ;
Wang, Tongmin ;
Li, Tingju .
MATERIALS & DESIGN, 2014, 57 :67-72
[7]   Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3C0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering [J].
Fang, Sicong ;
Chen, Weiping ;
Fu, Zhiqiang .
MATERIALS & DESIGN, 2014, 54 :973-979
[8]  
Fu Z. Q., 2011, THESIS HARBIN I TECH
[9]   Effects of Co and sintering method on microstructure and mechanical behavior of a high-entropy Al0.6NiFeCrCo alloy prepared by powder metallurgy [J].
Fu, Zhiqiang ;
Chen, Weiping ;
Wen, Haiming ;
Chen, Zhen ;
Lavernia, Enrique J. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 646 :175-182
[10]   Influence of Ti addition and sintering method on microstructure and mechanical behavior of a medium-entropy Al0.6CoNiFe alloy [J].
Fu, Zhiqiang ;
Chen, Weiping ;
Chen, Zhen ;
Wen, Haiming ;
Lavernia, Enrique J. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 619 :137-145
123456