Estimating Cell Temperature In A Concentrating Photovoltaic System

A temperature calibrated equivalent circuit model of a high efficiency CPV solar cell is used to simulate a measured six-cell module J-V curve to estimate its average operating temperature. The simulation is based on a two diode equivalent circuit model for each subcell of a representative triple junction cell. Module J-V curves in a real CPV system were measured with a test station that performs continuous voltage sweeps allowing cells to reach a well defined thermal equilibrium during measurement. The average electrical power extracted during measurement is then used to determine the cell temperature when they are operating at their maximum power point. It is shown that the cells would operate at 42 +/- 2 C degrees above ambient (32 +/- 2 degrees C abs.) given the ambient conditions during the measurement.