Daylighting design with lightscoop skylights: Towards an optimization of shape under overcast sky conditions

The main aim of this article is to determine a suitable shape for lightscoop skylights, whose main characteristic is a vertical opening oriented in the opposite direction to the solar trajectory, in order to ensure maximum illuminance on the work plane within a room. This type of skylight has a reflector, which is usually rectangular, curved or sawtooth shape, behind the vertical opening. Lightscape 3.2 software was used to carry out the simulations of different rooms with three different shapes of skylight. After trials, it was finally concluded that for this type of skylight, considering a height/width ratio of 4/3, the curved shape produces an increase of average daylight factors close to 3.5% compared with the rectangular shape, while the sawtooth shape produces a decrease of average daylight factors close to 3.5% in a room under overcast sky conditions. (C) 2013 Elsevier B.V. All rights reserved.