Effect of steel fiber and carbon black on the self-sensing ability of concrete cracks under bending

被引:75
作者
Ding, Yining [1 ]
Liu, Genjin [1 ]
Hussain, Abasal [1 ]
Pacheco-Torgal, F. [2 ]
Zhang, Yulin [3 ]
机构
[1] Dalian Univ Technol, State Key Lab Coastal & Offshore Engn, Dalian 116024, Peoples R China
[2] Univ Minho, C TAC Res Ctr, Guimaraes, Portugal
[3] Univ Minho, Ctr Math, P-4700052 Braga, Portugal
基金
中国国家自然科学基金;
关键词
Steel fiber; Carbon black; Crack sensing of concrete; COD - FCI relation; noise signal; Fractal dimension; CONDUCTIVE MATERIALS; REINFORCED CONCRETE; CEMENT; DAMAGE; RESISTANCE; BEHAVIOR; COMPOSITES; SENSORS;
D O I
10.1016/j.conbuildmat.2019.02.160
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This work explores the mechanical and self monitoring performance of concrete beams containing steel fiber (SF), carbon black (CB) and carbon fiber (CF), when subjected to bending. The effect of the utilization of multiphase conductive materials on the compressive strength of the concrete and the load - deflection - fractional change in impedance (FCI) relationship of the concrete beam are investigated. The relationships between FCI and crack opening displacement (COD) and sensitivity (gauge factor) are also studied. Moreover, the quantitative analysis of signal noise in FCI-COD curves has been accomplished by the fractal geometry method. The result shows that a monotonic linearity and bi-linearity increasing relationship between FCI and COD can be observed for beams with deflection-softening (Group A and Group B specimens) and deflection-hardening (Group C specimens) behavior, respectively. The diphasic conductive admixture (SF + CB) improves the FCI-COD curve with higher sensitivity and lower noise signal compared to the monophasic conductive admixture (SF) and the triphasic conductive admixture (SF + CB + CF) specimen. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码:630 / 639
页数:10
相关论文
共 35 条
[1]  
[Anonymous], 2002, MATER STRUCT, V35, P579, DOI [10.1617/13884, DOI 10.1617/13884]
[2]  
[Anonymous], 2010, C1609C1609M ASTM
[3]  
Azhari F, 2008, THESIS
[4]   Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing [J].
Azhari, Faezeh ;
Banthia, Nemkumar .
CEMENT & CONCRETE COMPOSITES, 2012, 34 (07) :866-873
[5]   Toughness enhancement in steel fiber reinforced concrete through fiber hybridization [J].
Banthia, N. ;
Sappakittipakorn, M. .
CEMENT AND CONCRETE RESEARCH, 2007, 37 (09) :1366-1372
[6]   Crack growth resistance of hybrid fiber reinforced cement composites [J].
Banthia, N ;
Nandakumar, N .
CEMENT & CONCRETE COMPOSITES, 2003, 25 (01) :3-9
[7]   Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes [J].
Buratti, Nicola ;
Mazzotti, Claudio ;
Savoia, Marco .
CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (05) :2713-2722
[8]   Carbon-fiber-reinforced cement-based sensors [J].
Chacko, Rose Mary ;
Banthia, Nemkumar ;
Mufti, Aftab A. .
CANADIAN JOURNAL OF CIVIL ENGINEERING, 2007, 34 (03) :284-290
[9]   Low-drying-shrinkage concrete containing carbon fibers [J].
Chen, PW ;
Chung, DDL .
COMPOSITES PART B-ENGINEERING, 1996, 27 (3-4) :269-274
[10]  
Chung D. D. L., 1995, Smart Materials and Structures, V4, P59, DOI 10.1088/0964-1726/4/1/009