Effects of Ti Addition on Austenite Grain Growth during Reheating of As-Cast 0.2 mass% Carbon Steel

被引：11

作者：

Ohno, Munekazu ^{[1
]}

Murakami, Chihiro ^{[2
]}

Matsuura, Kiyotaka ^{[1
]}

Isobe, Kohichi

机构：

[1] Hokkaido Univ, Div Mat Sci & Engn, Fac Engn, Kita Ku, Sapporo, Hokkaido 0608628, Japan

[2] Hokkaido Univ, Grad Sch Engn, Kita Ku, Sapporo, Hokkaido 0608628, Japan

来源：

ISIJ INTERNATIONAL | 2012年 / 52卷 / 10期

关键词：

austenite grain structure; pinning effect; reverse transformation; casting; grain growth; HOT-DUCTILITY; SOLIDIFICATION; TRANSFORMATION;

D O I：

10.2355/isijinternational.52.1832

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Effects of Ti addition on grain growth in reversely-transformed austenite structure during reheating of the as-cast 0.2 mass% C steel have been investigated for a Ti concentration range between 0 and 0.2 mass% and heating rates from 0.014 to 2.5 degrees C/s. The austenite grain growth during reheating is retarded by the Ti addition and such an effect becomes stronger with the addition of higher amount of Ti. This retarding effect is ascribable to the pinning effect of fine Ti(C,N) particles which should precipitate from the as-cast structure during the reheating process. The experimental results on the grain growth behavior are well explained by the grain growth model including the Zener force and counting reduction of the pinning effect due to the existence of the coarse Ti(C,N) particles crystallized during the solidification.

引用

页码：1832 / 1840

页数：9

共 28 条

[1]

Adachi A., 1963, TETSU TO HAGANE, V49, P894

[2] Nonisothermal Austenite Grain Growth Kinetics in a Microalloyed X80 Linepipe Steel [J].

Banerjee, Kumkum ;

Militzer, Matthias ;

Perez, Michel ;

Wang, Xiang .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (12) :3161-3172

[3] A Model for Predicting the Austenite Grain Size at the Surface of Continuously-Cast Slabs [J].

Bernhard, Christian ;

Reiter, Juergen ;

Presslinger, Hubert .

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2008, 39 (06) :885-895

[4] Phase transformation from fine-grained austenite [J].

Furuhara, T. ;

Kikumoto, K. ;

Saito, H. ;

Sekine, T. ;

Ogawa, T. ;

Morito, S. ;

Maki, T. .

ISIJ INTERNATIONAL, 2008, 48 (08) :1038-1045

[5]

Kanazawa S., 1975, Tetsu-to-Hagane, V61, P2589, DOI [10.2355/tetsutohagane1955.61.112589, DOI 10.2355/TETSUTOHAGANE1955.61.112589]

[6]

Kaufman L., 1970, COMPUTER CALCULATION, P1

[7]

Kinoshita S., 1973, TETSU TO HAGANE, V59, P1261

[8]

Kobayashi H., 1981, TETSU TO HAGANE, V67, P124

[9] Thermodynamic assessment of the Fe-Nb-Ti-C-N system [J].

Lee, BJ .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (10) :2423-2439

[10] Nucleation of austenite from pearlitic structure in an Fe-0.6C-1Cr alloy [J].

Li, Z. -D. ;

Miyamoto, G. ;

Yang, Z. -G. ;

Furuhara, T. .

SCRIPTA MATERIALIA, 2009, 60 (07) :485-488

← 1 2 3 →