Processing twining induced plasticity steel through simple shear extrusion

被引：26

作者：

Bagherpour, E. ^{[2
]}

Reihanian, M. ^{[1
]}

Ebrahimi, R. ^{[2
]}

机构：

[1] Shahid Chamran Univ, Fac Engn, Dept Mat Sci & Engn, Ahvaz, Iran

[2] Shiraz Univ, Sch Engn, Dept Mat Sci & Engn, Shiraz, Iran

来源：

MATERIALS & DESIGN | 2012年 / 40卷

关键词：

Extrusion; Ferrous metals and alloys; Plastic behavior; Microstructure; CHANNEL ANGULAR EXTRUSION; GRAIN-REFINEMENT; STRAIN REVERSAL; MODEL; DEFORMATION; MECHANISMS; CONTRAST;

D O I：

10.1016/j.matdes.2012.03.055

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Microstructure and deformation behavior of twinning induced plasticity steel processed by simple shear extrusion are investigated. Two appropriate dies with the maximum distortion angle of 30 degrees and 45 degrees are designed and constructed. Results show that the twin fraction increases while the twin spacing decreases as the equivalent strain rises in the deformation channel. The hardness reaches to its maximum at the middle of the deformation channel and decreases in the second half of the channel due to reversal straining. A similar trend is observed for dislocation density. The crystallite size is determined as 710 nm and 500 nm after one pass of simple shear extrusion with maximum distortion angle of 30 degrees and 45 degrees, respectively. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：262 / 267

页数：6

共 26 条

[1] A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel [J].

Allain, S ;

Chateau, JP ;

Bouaziz, O .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 :143-147

[2] Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys [J].

Allain, S ;

Chateau, JP ;

Bouaziz, O ;

Migot, S ;

Guelton, N .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 :158-162

[3]

ASTM E 92-82, 2003, E9282 ASTM

[4] On the capability of severe plastic deformation of twining induced plasticity (TWIP) steel [J].

Bagherpour, E. ;

Reihanian, M. ;

Ebrahimi, R. .

MATERIALS & DESIGN, 2012, 36 :391-395

[5] Grain refinement versus voids accumulation during severe plastic deformations of polycrystals: mathematical simulation [J].

Beygelzimer, Y .

MECHANICS OF MATERIALS, 2005, 37 (07) :753-767

[6] Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels [J].

Bouaziz, O. ;

Allain, S. ;

Scott, C. .

SCRIPTA MATERIALIA, 2008, 58 (06) :484-487

[7] High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships [J].

Bouaziz, O. ;

Allain, S. ;

Scott, C. P. ;

Cugy, P. ;

Barbier, D. .

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2011, 15 (04) :141-168

[8] Modelling of TWIP effect on work-hardening [J].

Bouaziz, O ;

Guelton, N .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 319 :246-249

[9] DEFORMATION TWINNING [J].

CHRISTIAN, JW ;

MAHAJAN, S .

PROGRESS IN MATERIALS SCIENCE, 1995, 39 (1-2) :1-157

[10] Flow stress analysis of TWIP steel via the XRD measurement of dislocation density [J].

Dini, G. ;

Ueji, R. ;

Najafizadeh, A. ;

Monir-Vaghefi, S. M. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (10-11) :2759-2763

← 1 2 3 →