Strengthening flexural reinforced concrete beams using natural fiber reinforced polymer composite laminates

被引:1
作者
Manivel, S. [1 ]
Pannirselvam, N. [1 ]
机构
[1] SRM Inst Sci & Technol, Dept Civil Engn, Kattankulathur 603203, Tamil Nadu, India
来源
JOURNAL OF ENGINEERING RESEARCH | 2022年 / 10卷
关键词
deflection; delamination; ductility; natural fiber; strength; PERFORMANCE; BEHAVIOR;
D O I
10.36909/jer.ACMM.16347
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Fiber obtained naturally which is bio-degradable and extracted from plant species. Hibiscus Vitifolius Stalk Fiber (HVSF) when used in concrete increases the ductility for both new and old structures under specific treatment to avoid degradable. The application of fiber in the concrete structure is increased due to behavioural property of high tensile, high straining, high modulus, thermal resistance, low density, impact load resistance, non-toxic and good resistance to chemical attack. The flexural behaviour of the concrete is investigated and evaluated the optimum thickness of fiber in the soffit of the beam by eliminating delamination. The effectiveness of optimum thickness of fiber improved the ultimate load, ultimate deflection and improved in crack resistance.
引用
收藏
页数:12
相关论文
共 18 条
  • [1] Arun Vignesh S, 2017, IOP C SERIES EARTH E, V80, P1
  • [2] Balamuralikrishnan R., 2009, The Open Civil Engineering Journal, V3, P102
  • [3] Flexural behavior of SFRC: Testing and modeling
    Barros, JAO
    Figueiras, JA
    [J]. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 1999, 11 (04) : 331 - 339
  • [4] Characterization of new cellulosic fiber from the stem of Sida rhombifolia
    Gopinath, R.
    Ganesan, K.
    Saravanakumar, S. S.
    Poopathi, R.
    [J]. INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 2016, 21 (02) : 123 - 129
  • [5] Physicochemical properties of new cellulosic fiber extracted from Carica papaya bark
    Kumaar, A. Saravana
    Senthilkumar, A.
    Sornakumar, T.
    Saravanakumar, S. S.
    Arthanariesewaran, V. P.
    [J]. JOURNAL OF NATURAL FIBERS, 2019, 16 (02) : 175 - 184
  • [6] Manibalan P., 2020, INT J MECH PRODUCTIO, V10, P16055
  • [7] Murali G., 2011, ARPN J ENG APPL SCI, V6, P41
  • [8] Pannirselvam N., 2008, American Journal of Engineering and Applied Sciences, V1, P192, DOI 10.3844/ajeassp.2008.192.199
  • [9] Pannirselvam N., 2008, INT J APPL ENG RES, V3, P999
  • [10] Pannirselvam N., 2009, ARPN J ENG APPL SCI, V4, P34