STUDY ON DYNAMIC PERFORMANCE OF THE NON-CIRCULAR BEARINGS USING FOURIER ANALYSIS

被引:0
作者
Tian, Jiale [1 ]
Yang, Baisong [1 ]
Yu, Lie [2 ]
Zhou, Jian [2 ]
机构
[1] Xi An Jiao Tong Univ, State Key Lab Strength & Vibrat Mech Struct, Xian 710049, Shaanxi, Peoples R China
[2] Xi An Jiao Tong Univ, Inst Mechatron & Informat Syst, Sch Mech Engn, Xian 710049, Shaanxi, Peoples R China
来源
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 9 | 2019年
基金
中国国家自然科学基金;
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Journal bearing is one of the most important components for supporting high speed rotating machinery such as compressors and turbo machines. In recent trends, non-circular journal bearings (lemon bearing, three-lobe bearing, four-lobe bearing, etc.), for their greater load capacity and better stability, have become a superior choice and found wide spread application. In this paper, the nonlinear oil film force is expressed using the dynamic stiffness and damping of 1st-3rd order. And the film thickness and pressure are analyzed using Fourier method, so that the corresponding harmonic components and their deeper connection can be further explored. The paper shows that the nonlinear dynamic performances are connected closely with the bearings' profile, and lays the foundation for expressing the precise nonlinear oil film force.
引用
收藏
页数:8
相关论文
共 9 条
[1]   Effect of Ellipticity Ratio on the Performance of an Inverted Three-Lobe Pressure Dam Bearing [J].
Batra, N. K. ;
Bhushan, Gian ;
Mehta, N. P. .
TRIBOLOGY TRANSACTIONS, 2012, 55 (06) :798-804
[2]   WAVE JOURNAL BEARING WITH COMPRESSIBLE LUBRICANT .1. THE WAVE BEARING CONCEPT AND A COMPARISON TO THE PLAIN CIRCULAR BEARING [J].
DIMOFTE, F .
TRIBOLOGY TRANSACTIONS, 1995, 38 (01) :153-160
[3]   Pressure distribution for multi-lobe bearings using Fourier analysis [J].
Li, Zhi ;
Yang, Lihua ;
Zhou, Jian ;
Yu, Lie .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, 229 (05) :624-635
[4]  
Pinkus O., 1956, T AM SOC MECH ENG, V78, P965
[5]  
Reynolds O., 1886, Philos. Trans. R. Soc. Lond., V177, P157
[6]  
Szeri A.Z., 2010, Fluid Film Lubrication
[7]  
Yang B, 2016, P ASM INT MECH ENG A, V4A
[8]  
2007, TRIBOL INT, V40, P453, DOI DOI 10.1016/J.TRIBOINT.2006.04.009
[9]  
1995, TRIBOLOGY T, V38, P364