Low-Loss Titanium Dioxide Strip Waveguides Fabricated by Atomic Layer Deposition

We introduce low-loss amorphous titanium dioxide (TiO2) strip waveguides with sub-wavelength dimensions. The waveguides were fabricated by the combination of atomic layer deposition (ALD), electron beam lithography (EBL), and reactive ion etching (RIE). Propagation losses of the strip waveguides were found to be as low as 5.0 dB/cm at 1.55 mu m wavelength. Those propagation losses are mostly due to the sidewall roughness of the waveguides that is caused by the lithography process. The propagation losses were further reduced by deposition, on the fabricated strip waveguides, of an additional layer of TiO2 made by using ALD. A supplementary layer of TiO2 with a thickness of 30 nm reduced the measured propagation losses from 5.0 +/- 0.5 dB/cm to 2.4 +/- 0.2 dB/cm at 1.55 mu m wavelength. It is due to the fact that, after the redeposition process, the initial waveguide sidewall, i.e., the TiO2/air interface, is virtually removed and the new sidewall has a reduced roughness.