Dielectric properties of epoxy resin fly ash composite

被引:11
作者
Pattanaik, A. [1 ]
Bhuyan, S. K. [1 ]
Samal, S. K. [1 ]
Behera, A. [1 ]
Mishra, S. C. [1 ]
机构
[1] Natl Inst Technol, Dept Met & Mat Engn, Rourkela 769008, India
来源
5TH NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS | 2016年 / 115卷
关键词
D O I
10.1088/1757-899X/115/1/012003
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Epoxy resin is widely used as an insulating material in high voltage applications. Ceramic fillers are always added to the polymer matrix to enhance its mechanical properties. But at the same time, filler materials decreases the electrical properties. So while making the fly ash epoxy composite, it is obvious to detect the effect of fly ash reinforcement on the dielectric nature of the material. In the present research work, fly ash is added to four different weight percentages compositions and post-curing has been done in the atmospheric condition, normal oven and micro oven. Tests were carried out on the developed polymer composite to measure its dielectric permittivity and tan delta value in a frequency range of 1 Hz - 1 MHz. The space charge behaviours were also observed by using the pulse electroacoustic (PEA) technique. The dielectric strength and losses are compared for different conditions.
引用
收藏
页数:7
相关论文
共 15 条
[11]   Phase equilibria in high energy density PVDF-Based polymers [J].
Ranjan, V. ;
Yu, L. ;
Nardelli, Marco Buongiorno ;
Bernholc, J. .
PHYSICAL REVIEW LETTERS, 2007, 99 (04)
[12]   Properties and microstructures of low-temperature-processable ultralow-dielectric porous polyimide films [J].
Ren, Yuxing ;
Lam, David C. C. .
JOURNAL OF ELECTRONIC MATERIALS, 2008, 37 (07) :955-961
[13]   Mechanochemical preparation of BaTiO3-Ni nanocomposites with high dielectric constant [J].
Sanchez-Jimenez, Pedro E. ;
Perez-Maqueda, Luis A. ;
Dianez, Maria J. ;
Perejon, Antonio ;
Criado, Jose M. .
COMPOSITE STRUCTURES, 2010, 92 (09) :2236-2240
[14]   X-RAY-DIFFRACTION AND DIELECTRIC STUDIES OF A BATIO3 - PVDF COMPOSITE [J].
SEKAR, R ;
TRIPATHI, AK ;
PILLAI, PKC .
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 1989, 5 (01) :33-36
[15]  
Yinping Z, 1999, MEAS SCI TECHNOL, V10, P201, DOI DOI 10.1088/0957-0233/10/3/015