Study on the Influence and Control of Stress Direction Deflection and Partial-Stress Boosting of Main Roadways Surrounding Rock and under the Influence of Multi-Seam Mining

被引:9
作者
Chen, Dongdong [1 ]
Guo, Fangfang [1 ]
Li, Zijian [1 ]
Ma, Xiang [1 ]
Xie, Shengrong [1 ]
Wu, Yiyi [1 ]
Wang, Zhiqiang [1 ]
机构
[1] China Univ Min & Technol Beijing, Sch Energy & Min Engn, Beijing 100083, Peoples R China
基金
中国博士后科学基金; 中国国家自然科学基金;
关键词
main roadway group; mining-induced stress; surrounding rock stability; ground control; deflection of principal stress; COAL-MINE; FAILURE; PILLAR;
D O I
10.3390/en15218257
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
A large coal pillar (usually more than 90 m) is generally left in place to ensure the stability of main roadway groups, due to its long service lifespan, which commonly also causes a significant loss of coal resources. The design of the width of the protective coal pillar and the control system of the surrounding rock are directly determined by the characteristics of the stress field and the damage mechanism under the influence of the mining activities. However, there are few studies on the effects of the partial-stress boosting and the direction deflection of the stress field on the failure evolution of the surrounding rock (especially in multi-seam mining). In this paper, theoretical analysis and numerical simulation are used to investigate the direction evolution of the maximum principal stress in front of the working face with malposition distances between the upper and lower working faces during the influence of double coal seams mining. Furthermore, a large-scale numerical model is used to study the deviatoric stress evolution of the surrounding rock and the propagation process of the plastic zone in the main roadway group with different widths of protective coal pillars. Then, an asymmetric cooperative anchoring classification method is proposed to strengthen the roadway support, depending on the critical area of the deviatoric stress in the roadway surrounding rock. The peak zone deflection of the deviatoric stress determines the evolution direction of the plastic area, and the peak value of the deviatoric stress presents a typical asymmetric stress boosting on both sides of the roadway. These findings are validated by the on-site ground pressure monitoring results and the practical failure modes of the surrounding rock.
引用
收藏
页数:24
相关论文
共 43 条
  • [1] Barber JR, 2002, ELASTICITY
  • [2] A review of the geomechanics aspects of a double fatality coal burst at Austar Colliery in NSW, Australia in April 2014
    Bruce, Hebblewhite
    Jim, Galvin
    [J]. INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY, 2017, 27 (01) : 3 - 7
  • [3] Cai M.F., 2002, ROCK MECH ENG
  • [4] Current Status of Hydrogen Production in China
    Cao, Junwen
    Zhang, Wenqiang
    Li, Yifeng
    Zhao, Chenhuan
    Zheng, Yun
    Yu, Bo
    [J]. PROGRESS IN CHEMISTRY, 2021, 33 (12) : 2215 - 2244
  • [5] Mining-induced failure characteristics and surrounding rock control of gob-side entry driving adjacent to filling working face in the deep coal mine
    Chen, Dongdong
    Guo, Fangfang
    Xie, Shengrong
    Wang, En
    Wu, Yiyi
    Jiang, Zaisheng
    Wang, Long
    Cui, Junqi
    Zhang, Xiao
    Liu, Ruipeng
    [J]. ENERGY SCIENCE & ENGINEERING, 2022, 10 (08) : 2593 - 2611
  • [6] Reasonable location of stopping line in close-distance underlying coal seam and partition support of large cross-section roadway
    Chen, Dongdong
    Wu, Yiyi
    Xie, Shengrong
    Guo, Fangfang
    He, Fulian
    Liu, Ruipeng
    [J]. INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY, 2022, 9 (01)
  • [7] Numerical Simulation of Squeezing Failure in a Coal Mine Roadway due to Mining-Induced Stresses
    Gao, Fuqiang
    Stead, Doug
    Kang, Hongpu
    [J]. ROCK MECHANICS AND ROCK ENGINEERING, 2015, 48 (04) : 1635 - 1645
  • [8] Simulation of roof shear failure in coal mine roadways using an innovative UDEC Trigon approach
    Gao, Fuqiang
    Stead, Doug
    Kang, Hongpu
    [J]. COMPUTERS AND GEOTECHNICS, 2014, 61 : 33 - 41
  • [9] Discrete element modelling of deformation and damage of a roadway driven along an unstable goaf - A case study
    Gao, Fuqiang
    Stead, Doug
    Kang, Hongpu
    Wu, Yongzheng
    [J]. INTERNATIONAL JOURNAL OF COAL GEOLOGY, 2014, 127 : 100 - 110
  • [10] Optimum Chain Pillar Design at the Deepest Multi-Seam Longwall Workings in India
    Ghosh, Nilabjendu
    Agrawal, Harshit
    Singh, Satyendra Kumar
    Banerjee, Gautam
    [J]. MINING METALLURGY & EXPLORATION, 2020, 37 (02) : 651 - 664