R-curve behaviour of friction stir welds in aluminium-lithium alloy 2195

被引：29
|
作者：
Kroninger, HR [1 ]
Reynolds, AP [1 ]
机构：
[1] Univ S Carolina, Dept Mech Engn, Columbia, SC 29208 USA
来源：
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 2002年 / 25卷 / 03期
关键词：
Al-Li alloy; fracture resistance; friction stir welding;
D O I：
10.1046/j.1460-2695.2002.00466.x
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The fracture resistance of friction stir welds in 2195-T8 is described in this paper. R-curves were produced for several crack planes, parallel to the welding direction and situated at varying distances from the weld centreline. The friction stir weld was also characterized by hardness and tensile testing. Fracture resistance of the friction stir weld is compared to the base metal and to a variable polarity plasma arc weld. Results show that the material in and around the friction stir weld is tougher than the base metal and the variable polarity plasma arc weld. The friction stir weld fracture performance is discussed in the light of the observed hardness and fractographic data presented.
引用
收藏
页码：283 / 290
页数：8
相关论文
共 50 条
  • [21] Effect of tempering conditions on dynamic deformation behaviour of an aluminium-lithium alloy
    Ghosh, A.
    Adesola, A.
    Szpunar, J. A.
    Odeshi, A. G.
    Gurao, N. P.
    MATERIALS & DESIGN, 2015, 81 : 1 - 10
  • [22] Study on friction stir welding technology of Aluminium Lithium alloy
    Di, O
    PROCEEDINGS OF THE CHINA ASSOCIATION FOR SCIENCE AND TECHNOLOGY, VOL 1, NO 2, 2004, : 112 - 115
  • [23] Influence of impact dents on the fatigue strength of aluminium alloy friction stir welds
    Zhang, X.
    Chan, B.
    Lama, S.
    Satikumar, V.
    Shi, S.
    Bao, R.
    FATIGUE 2010, 2010, 2 (01): : 1691 - 1700
  • [24] Peak temperatures and microstructures in aluminium and magnesium alloy friction stir spot welds
    Gerlich, A
    Su, P
    North, TH
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2005, 10 (06) : 647 - 652
  • [25] Friction stir welds of aluminium alloy pipes: an investigation of defects and mechanical properties
    Hashmi, Farzan Athar
    Mohamed Ali, Halima Begum
    Lone, Nadeem Fayaz
    Azma, Rukaiya
    Siddiquee, Arshad Noor
    Ashraf Mir, Mohammad
    Ahmad, Tariq
    Mir, Fayaz Ahmad
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2023, 9 (01) : 169 - 185
  • [26] Microstructure mapping in friction stir welds of 7449 aluminium alloy using SAXS
    Dumont, M.
    Steuwer, A.
    Deschamps, A.
    Peel, M.
    Withers, P. J.
    ACTA MATERIALIA, 2006, 54 (18) : 4793 - 4801
  • [27] Double-sided friction stir welding of 2195 aluminum-lithium alloy
    Sun, Shouyi
    Wang, Jin
    Cao, Gaowei
    Mu, Kaicheng
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2025, 53 (02): : 125 - 132
  • [28] A phenomenological hardening model for an aluminium-lithium alloy
    Nayan, Niraj
    Mahesh, Sivasambu
    Prasad, M. J. N. V.
    Murthy, S. V. S. N.
    Samajdar, Indradev
    INTERNATIONAL JOURNAL OF PLASTICITY, 2019, 118 : 215 - 232
  • [29] Fatigue Crack Growth Behaviour in Friction Stir Welded Aluminium–Lithium Alloy Subjected to Biaxial Loads
    V. Richter-Trummer
    X. Zhang
    P. E. Irving
    M. Pacchione
    M. Beltrão
    J. F. dos Santos
    Experimental Techniques, 2016, 40 : 921 - 935
  • [30] Effect of rotational speed and copper interlayer on the mechanical and fracture behaviour of friction stir spot welds of 5754 aluminium alloy
    Gassaa, Ramzi
    Hemmouche, Larbi
    Badji, Riad
    Gilson, Lionel
    Rabet, Luc
    Mimouni, Oussama
    METALLURGICAL RESEARCH & TECHNOLOGY, 2023, 120 (01)
12345