Assessing the pavement subgrade by combining different non-destructive methods

被引:43
|
作者
Marecos, Vania [1 ,2 ]
Solla, Mercedes [3 ,4 ]
Fontul, Simona [1 ]
Antunes, Vitor [1 ,5 ]
机构
[1] LNEC, Natl Lab Civil Engn, Av Brasil 101, P-1700066 Lisbon, Portugal
[2] Univ Vigo, Sch Min Engn, Doctoral Programme Geotechnol Appl Construct Ener, Campus Lagoas Marcosende, Vigo 36310, Spain
[3] Spanish Naval Acad, Def Univ Ctr, Plaza Espana 2, Marin 36920, Pontevedra, Spain
[4] Univ Vigo, Sch Min Engn, Appl Geotechnol Res Grp, Campus Lagoas Marcosende, Vigo 36310, Spain
[5] Elevolut Engn Construcao SA, Estr Seminario 4 Alfragide, P-2610171 Amadora, Portugal
关键词
Roads; Subgrade; Cracking; NDT; GPR; FWD; LWD;
D O I
10.1016/j.conbuildmat.2017.01.003
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The subgrade provides support to the pavement system and assures an effective distribution of traffic loads in depth. Therefore, a failure in the subgrade will have consequences on the entire pavement behaviour. This work presents an integrated approach for the analysis of the road subgrade condition by combining different Non-Destructive Testing (NDT) techniques. Different Ground Penetrating Radar (GPR) systems, both antennas configuration and frequencies, were tested in order to achieve the best methodology for subgrade cracking detection. Additionally, NDT load tests were performed with two deflectometers, Falling Weight Deflectometer (FWD) and Light Weight Deflectometer (LWD), aiming to determine the elastic modulus of the subgrade and consequently detect damaged areas. The tests were conducted at a real scale test section built to simulate pavement foundation layers consisting of clay soil subgrade, frequently used in African countries. The main tests performed are presented and analysed in this paper. Troubleshooting's are referred mainly related with GPR wave propagation on clayey materials, due to high absorption. Recommendations are made regarding the use of GPR antennas as air-coupled antennas lead to a better identification of pavement layer interfaces while ground-coupled antennas were preferable to detect anomalous areas, namely cracking and debonding. The results showed good agreement between both NDT methods (GPR and load tests) in the identification of the anomalous areas and were validated with some in-situ cores extracted. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:76 / 85
页数:10
相关论文
共 50 条
  • [41] Non-destructive methods for fruit quality evaluation
    Bratu, Ana-Maria
    Popa, Cristina
    Bojan, Mihaela
    Logofatu, Petre Catalin
    Petrus, Mioara
    SCIENTIFIC REPORTS, 2021, 11 (01)
  • [42] Editorial: Use of remote non-destructive methods
    Henley, Richard
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENGINEERING HISTORY AND HERITAGE, 2024, 177 (04) : 107 - 108
  • [43] Non-destructive evaluation methods of materials and structures
    Chilibon, Irinela
    Defect and Diffusion Forum, 2015, 364 : 122 - 131
  • [44] Non-destructive testing methods for moisture determination
    Maierhofer, C
    Wolter, B
    NDT IN PROGRESS, PROCEEDINGS: MEETING OF NDT - EXPERTS, 2001, : 41 - 54
  • [45] Non-destructive methods to detect decay in trees
    Kaestner, A
    Niemz, P
    WOOD RESEARCH, 2004, 49 (02): : 17 - 28
  • [46] QUANTITATIVE ULTRASONIC NON-DESTRUCTIVE EVALUATION METHODS
    THOMPSON, RB
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1983, 50 (4B): : 1191 - 1201
  • [47] TESTING OF PERVIOUS CONCRETE WITH NON-DESTRUCTIVE METHODS
    Seslija, Milos
    Radonjanin, Vlastimir
    Radovic, Nebojsa
    ROAD AND RAIL INFRASTRUCTURE V, 2018, : 527 - 533
  • [48] Non-destructive testing methods in nuclear industry
    Lipka, J
    Slugen, V
    NON-LINEAR ELECTROMAGNETIC SYSTEMS - ISEM '99, 2000, : 313 - 316
  • [49] NON-DESTRUCTIVE METHOD OF ASSESSING TOUGHNESS OF INDIVIDUAL TURKEYS
    RANKEN, MD
    SHRIMPTON, DH
    JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE, 1968, 19 (10) : 611 - +
  • [50] Non-destructive testing for assessing the tightness of cover concrete
    Shoya, M
    PROCEEDINGS OF THE FOURTH INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING FOR RESOURCES, VOL 1, 2001, : 59 - 64