Investigation and Application of Forced Cooling of WH 600MW Steam Turbine

被引：0
|
作者：
Shi, Yongfeng [1 ,2 ]
Xu, Jianqun [1 ]
Ma, Lin
机构：
[1] Southeast Univ, Sch Energy & Environm, Key Lab Energy Thermal Convers & Control, Minist Educ, Nanjing 210096, Jiangsu, Peoples R China
[2] HuaDian Elect Res Inst, Hangzhou 310030, Zhejiang, Peoples R China
来源：
THERMAL, POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2 | 2013年 / 732-733卷
关键词：
Forced cooling; Natural cooling; Radiating mechanism; Control strategy;
D O I：
10.4028/www.scientific.net/AMR.732-733.242
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
With a long natural cooling time after a shutdown of steam turbine restricting its available coefficient, this paper presented the analysis and application of a forced cooling process to sub-critical steam turbine. The radiating mechanism of natural cooling was analyzed theoretically, and the required amount of cooling air was calculated for a WH 600MW steam turbine. Moreover, the cooling rate with no life loss principle was determined by the method of quantitative calculation and numerical analysis, together with safety analysis. The research discussed the control strategy of practical application according with steam turbine characteristic and applied to operation, which provided theoretical guidance for the optimization of cooling condition.
引用
收藏
页码：242 / +
页数：2
相关论文
共 50 条
  • [41] Investigation of metallic foam in the application of turbine cooling
    Zhang, Hongjun
    Zou, Zhengping
    Qi, Lei
    Liu, Huoxing
    2011 CHINESE MATERIALS CONFERENCE, 2012, 27 : 752 - 761
  • [42] With ultrasound stages and innovative cooling system (ICS) for cooling steam at the 600 Mw oxyfuel Graz cycle unit
    Jericha, Herbert
    Sanz, Wolfgang
    Göttlich, Emir
    Neumayer, Fritz
    VDI Berichte, 2008, (2051): : 215 - 228
  • [43] Parameters control and optimization during forced cooling process after shutdown of steam turbine
    Zhou, Yu-Yang
    Chen, Han-Ping
    Xin, Jian-Hua
    Ye, Chun
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2000, 20 (11): : 72 - 76
  • [44] Investigation of wet steam flow in a 300 MW direct air-cooling steam turbine. Part 1: measurement principles, probe, and wetness
    Cai, X.
    Ning, T.
    Niu, F.
    Wu, G.
    Song, Y.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2009, 223 (A5) : 625 - 634
  • [45] Research on characteristics of solid particle erosion in governing stage of a 600 MW supercritical steam turbine
    Zhang, Zhongbin
    Li, Fang
    Cao, Lihua
    Hu, Pengfei
    Li, Yong
    APPLIED THERMAL ENGINEERING, 2017, 118 : 471 - 479
  • [46] Application of structure functions for the investigation of forced air cooling
    Janicki, Marcin
    Banaszczyk, Jedrzej
    De Mey, Gilbert
    Kaminski, Marek
    Vermeersch, Biorn
    Napieralski, Andrzej
    13TH INTERNATIONAL WORKSHOP ON THERMAL INVESTIGATION OF ICS AND SYSTEMS, PROCEEDINGS, 2007, : 2 - +
  • [47] Crack cause analysis of pulverizing wheel in fan mill of 600 MW steam turbine unit
    Liu, Chao
    Jiang, Dongxiang
    Chu, Fulei
    Chen, Jingming
    ENGINEERING FAILURE ANALYSIS, 2014, 42 : 60 - 73
  • [48] An all-condition simulation model of the steam turbine system for a 600 MW generation unit
    Zhang, Yanping
    Wang, Jizhou
    Yang, Shujin
    Gao, Wei
    JOURNAL OF THE ENERGY INSTITUTE, 2018, 91 (02) : 279 - 288
  • [49] Experimental and Numerical Investigation on Steam/Air Cooling Performance of a Turbine Blade
    Ma C.
    Ge B.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2020, 40 (16): : 5264 - 5273
  • [50] NUMERICAL INVESTIGATION ON THE COOLING EFFECTIVENESS AMONG AIR AND STEAM AND MIST/STEAM FOR A GAS TURBINE VANE
    Zhou, Junfei
    Wang, Xinjun
    Li, Jun
    Zhang, Feng
    Zheng, Daren
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 5A, 2017,
12345