Microstructure of Al-Mn-Be melt-spun ribbons

被引:19
作者
Zupanic, Franc [1 ]
Boncina, Tonica [1 ]
Sustarsic, Borivoj [2 ]
Anzel, Ivan [1 ]
Markoli, Bostjan [3 ]
机构
[1] Univ Maribor, Fac Mech Engn, SI-2000 Maribor, Slovenia
[2] Inst Met & Technol, SI-1000 Ljubljana, Slovenia
[3] Univ Ljubljana, Fac Nat Sci & Engn, SI-1000 Ljubljana, Slovenia
关键词
melt-spinning; Al-Mn-Be alloy; quasicrystal; aluminium alloys; metallography;
D O I
10.1016/j.matchar.2007.10.007
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Microstructures of two alloys with the nominal compositions of Al92Mn3Be5 and Al89Mn6Be5 were characterized in the initial as-cast condition (after vacuum induction melting and casting) and after melt spinning. In the initial conditions, both alloys consisted of an aluminum-rich solid solution and two metastable intermetallic phases: Be4AlMn and Al10Mn3(Be). Both alloys melted over a rather large temperature range (between 230 degrees C and 310 degrees C). This was the main reason for the presence of unmelted particles in the melt-spun ribbons. Nonetheless, with the use of optimized melt-spinning parameters a microstructure composed of the Al-rich solid solution and finely dispersed quasicrystalline particles in ribbons with thicknesses ranging from 30-200 mu m was achieved. The dispersion of quasicrystalline particles was finest on the wheel side of the thinnest ribbons, attaining microhardness values between 250 HV and 300 HV. (C) 2007 Elsevier Inc. All rights reserved.
引用
收藏
页码:1245 / 1251
页数:7
相关论文
共 50 条
[41]   RESISTIVITY STUDIES OF MELT-SPUN AND ANNEALED AL-MN-FE-SI MULTIPLY TWINNED SAMPLES [J].
SINGH, K ;
BAHADUR, D ;
SASTRY, GVS .
BULLETIN OF MATERIALS SCIENCE, 1995, 18 (02) :155-160
[42]   Structure and magnetic properties of melt-spun Sm-Fe-Nb ribbons and their nitrides [J].
Yan, Wen-Long ;
Luo, Yang ;
Yu, Dun-Bo ;
Wu, Gui-Yong ;
Quan, Ning-Tao ;
Yang, Yuan-Fei ;
Peng, Hai-Jun ;
Wang, Zi-Long .
RARE METALS, 2018, 37 (03) :232-236
[43]   Coercivity of Sm(Co0.9Cu0.1)4.8 melt-spun ribbons [J].
Suresh, K. ;
Gopalan, R. ;
Singh, A. K. ;
Bhikshamaiah, G. ;
Chandrasekaran, V. ;
Hono, K. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 436 (1-2) :358-363
[44]   First Order Reversal Curve Study of SmFe2 Melt-Spun Ribbons [J].
Grijalva-Castillo, Maria C. ;
Santillan-Rodriguez, Carlos R. ;
Saenz-Hernandez, Renee J. ;
Botello-Zubiate, Maria E. ;
Matutes-Aquino, Jose A. .
MATERIALS, 2018, 11 (10)
[45]   Phase transformations in melt-spun Ni-Mn-Ga alloys [J].
Chernenko, V ;
Seguí, C ;
Pons, J ;
Cesari, E ;
Ochin, P ;
Portier, R .
JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, :1112-1115
[46]   Giant magnetic-field-induced bending effect in Ni-Mn-Ga-Co-Cu melt-spun ribbons [J].
Szczerba, M. J. .
SCRIPTA MATERIALIA, 2021, 205
[47]   Magnetic properties of Sm5Fe17 melt-spun ribbons and their borides [J].
Saito, Tetsuji ;
Nishio-Hamane, Daisuke .
AIMS MATERIALS SCIENCE, 2015, 2 (04) :392-400
[48]   Metallurgical characterization of melt-spun ribbons of U-5.4 wt%Nb alloy [J].
Ma, Rong ;
Ren, Zhiyong ;
Tang, Qingfu ;
Chen, Dong ;
Liu, Tingyi ;
Su, Bin ;
Wang, Zhenhong ;
Luo, Chao .
JOURNAL OF NUCLEAR MATERIALS, 2018, 504 :281-288
[49]   EFFECT OF Sc ADDITION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MELT-SPUN Al-10Ni ALLOYS [J].
Kilicaslan, M. Fatih ;
Karakose, E. .
ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (02) :575-579
[50]   Microstructure and magnetic properties of melt-spun Alnico-5 alloys [J].
Loewe, Konrad ;
Duerrschnabel, Michael ;
Molina-Luna, Leopoldo ;
Madugundo, Rajasekhar ;
Frincu, Bianca ;
Kleebe, Hans-Joachim ;
Gutfleisch, Oliver ;
Hadjipanayis, George C. .
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2016, 407 :230-234