Effect of material anisotropy on shear angle prediction in metal cutting - a mesoplasticity approach

被引：37

作者：

Lee, WB ^{[1
]}

To, S ^{[1
]}

Sze, YK ^{[1
]}

Cheung, CF ^{[1
]}

机构：

[1] Hong Kong Polytech Univ, Adv Mfg Technol Res Ctr, Kowloon, Hong Kong, Peoples R China

来源：

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | 2003年 / 45卷 / 10期

关键词：

shear angle; mesoplasticity; Taylor factor; crystallographic orientation; ultra-precision diamond turning;

D O I：

10.1016/j.ijmecsci.2003.09.024

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Material anisotropy plays an important role in the formation of shear angle in metal cutting. Crystallographic textures contribute to an important source of material anisotropy. A simplified mesoplasticity model is proposed in this paper to predict the effect of crystallographic orientations on the shear angle formation in machining a polycrystalline work material. The most likely shear angle is the one at which the Taylor factor is minimum. A good agreement is found between the predicted shear angle in machining a polycrystalline OFHC copper and the experimental data reported in the published literature. The assumptions made in the model approximate well the cutting conditions commonly encountered in single point diamond turning process. (C) 2003 Published by Elsevier Ltd.

引用

页码：1739 / 1749

页数：11

共 29 条

[1]

ALBRECHT J, 1961, J ENG IND, V83, P553

[2]

[Anonymous], 1973, Deformation geometry for materials scientists

[3]

BISHOP JFW, 1951, PHILOS MAG, V42, P414

[4]

BLACK JT, 1971, ASME, V93, P507

[5]

BUNGE HJ, 1987, TEXTURE ANAL MAT SCI, P226

[6]

Eugene Merchant M, 1945, J APPL PHYS, V16, P267, DOI DOI 10.1063/1.1707586

[7] A MACHINING THEORY FOR PREDICTING CHIP GEOMETRY, CUTTING FORCES ETC FROM WORK MATERIAL PROPERTIES AND CUTTING CONDITIONS [J].

HASTINGS, WF ;

MATHEW, P ;

OXLEY, PLB .

PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1980, 371 (1747) :569-587

[8]

Kobayashi S, 1962, J ENG IND, V84, P71

[9]

KOBAYASKI A, 1962, B ELECTROCHEMICAL LA, V26, P1

[10]

KONIG W, 1991, P 6 INT PREC ENG SEM, P141, DOI DOI 10.1007/978-3-642-84494-2_15

← 1 2 3 →