Improved accuracy for the Cm factor of steel beam-columns

The C-m factor acting originally as equivalent moment factor for stability checking of beam-columns, assumes an additional function as part of the magnification factor B-1 since the AISC-LRFD specification adopted a single equation for beam-column strength calculation. This article first clarifies the difference between the two roles of C-m for in-plane instability checking and section yielding checking and establishes the relationship between the two C-m. As there is no distinction between the two C-m, some confusion occurs in the current AISC specification, and C-m as equivalent moment factor is not accurately evaluated in many cases. In the present study, the ratio P/P-e is introduced into the C-m formula for beam-columns subject to end moments to enhance its precision. For members subject to transverse loading, formulas based on rational analysis are given in order to avoid the use of conservative value of 1.0. By making use of the principle of superposition, simple and accurate formulas are obtained for the case of transverse loading combined with end moments. The proposed formulas are compared with the calculation by finite element method to ensure their feasibility for designing elastic-plastic members with initial imperfections. The results are satisfactory. (C) 2015 Elsevier Ltd. All rights reserved.