Design and Test of A High Power IGBT Non-Destructive Tester

被引：0
|
作者：
Ahmed, Ashraf [1 ]
Castellazzi, A. [2 ]
Coulbeck, L. [3 ,4 ]
Johnson, M. C. [2 ]
机构：
[1] Soongsil Univ, Seoul, South Korea
[2] Univ Nottingham, Nottingham, England
[3] Dynex Semicond Ltd, Lincoln, England
[4] Zhuzhou CSR Times Elect Ltd, Power Semicond R&D Ctr, Hunan, Peoples R China
来源：
2012 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE) | 2012年
关键词：
IGBT; non-destructive; tester; Analysis; MODULES;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The study proposes the primary design and transient analysis of an IGBT non-destructive tester. The tester is designed to test IGBTs at voltage and current ratings less than 3.3kV 2.4kA. Due to stray elements, the circuit might oscillate during the different modes of operation and test conditions. These oscillations could cause high stresses to the IGBT switches in the circuit and cause one or more of the switches to fail. A transient analysis is performed taking into account the different operating conditions. Hence the potential for destructive oscillations can be minimized via the proper design of the IGBT gate resistors. Simulation results of a failure case study using spice simulation software are then presented. In the last part, the design was verified by experimental test.
引用
收藏
页码：292 / 297
页数：6
相关论文
共 50 条
  • [1] Transient Analysis and Simulation of A High Power IGBT Non-Destructive Tester
    Ahmed, A.
    Coulbeck, L.
    Castellazzi, A.
    Johnson, C. M.
    2012 15TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (EPE/PEMC), 2012,
  • [2] Circuit design and experimental test of a high power IGBT non-destructive tester
    Ahmed, Ashraf
    Castellazzi, A.
    Coulbeck, L.
    Johnson, M. C.
    MICROELECTRONICS RELIABILITY, 2012, 52 (11) : 2609 - 2616
  • [3] Non-destructive parameters extraction for IGBT spice model and compared with measurements
    Yuan, SC
    SOLID-STATE ELECTRONICS, 2005, 49 (01) : 123 - 129
  • [4] Experimental Demonstration of Non-Destructive Detection of IGBT Fault Positions by Magnetic Sensor
    Nguyen Ngoc Mai-Khanh
    Nakajima, Shigeru
    Iizuka, Tetsuya
    Mita, Yoshio
    Asada, Kunihiro
    2017 IEEE SENSORS APPLICATIONS SYMPOSIUM (SAS), 2017,
  • [5] Novel IGBT SPICE Model with Non-destructive Parameter Extraction and Comparison with Measurements
    YUAN Shou cai
    SemiconductorPhotonicsandTechnology, 2002, (03) : 157 - 165
  • [6] Laser Validation of a Non-Destructive Test Methodology for the Radiation Sensitivity Assessment of Power Devices
    Miller, F.
    Morand, S.
    Douin, A.
    Gaillard, R.
    Carriere, T.
    Buard, N.
    IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 2011, 58 (03) : 813 - 819
  • [7] Measurement of firmness of Irwin mangoes by a non-destructive acoustic tester during cold storage
    Al-Haq, MI
    Sugiyama, J
    TRANSACTIONS OF THE ASAE, 2004, 47 (06): : 2017 - 2021
  • [8] Non-Destructive and Destructive Shortcircuit Characterization of a High-Current SiC MOSFET
    Romero, Amy
    Burgos, Rolando
    2018 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2018, : 862 - 867
  • [9] A NON-DESTRUCTIVE TEST METHOD TO ASSESS THE COMPOSITION OF EXISTING FLOATING FLOORS
    Neves e Sousa, Albano
    ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, 2012,
  • [10] Effectiveness Analysis of a Non-Destructive Single Event Burnout Test Methodology
    Oser, P.
    Mekki, J.
    Spiezia, G.
    Fadakis, E.
    Foucard, G.
    Peronnard, P.
    Masi, A.
    Gaillard, R.
    IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 2014, 61 (04) : 1865 - 1873
12345