Effect of TiNi in dry sliding wear of laser melt deposited Ti2Ni/TiNi alloys

被引：36

作者：

Gao, F. ^{[1
]}

Wang, H. M. ^{[1
]}

机构：

[1] Beihang Univ, Sch Mat Sci & Engn, Lab Laser Mat Proc & Mfg, Beijing 100083, Peoples R China

来源：

MATERIALS CHARACTERIZATION | 2008年 / 59卷 / 09期

基金：

中国国家自然科学基金;

关键词：

intermetallics; TiNi; Ti2Ni; wear;

D O I：

10.1016/j.matchar.2008.05.007

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Wear resistant TiNi-based intermetallic alloys reinforced by isolated irregular Ti2Ni particles were fabricated by a laser melt deposition process. The alloy Ti50Ni50 included Ti2Ni and B2 TiNi, while the alloy Ti53.8Ni46.2 consisted of Ti2Ni and martensitic TiNi. Wear resistance of the alloys was evaluated on a block-on-wheel dry sliding wear tester at room temperature under loads of 98 N,147 N and 196 N. The Ti2Ni/TiNi intermetallic alloys exhibited high wear resistance. The intermetallic alloy Ti50Ni50 showed less plastic deformation than Ti53.8Ni46.2 owing to the pseudoelasticity of Ti50Ni50, while wear mass loss of Ti53.8Ni46.2 was slightly higher than Ti50Ni50 because Ti53.8Ni46.2 had more Ti2Ni reinforcing phase that enhanced the Ti2Ni/TiNi intermetallic alloys wear resistance at high contact stress. (c) 2008 Elsevier Inc. All rights reserved.

引用

页码：1349 / 1354

页数：6

共 17 条

[1] Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy [J].

Gao, F. ;

Wang, H. M. .

INTERMETALLICS, 2008, 16 (02) :202-208

[2]

GAO F, 2007, RARE METAL MAT ENG, V17, P1358

[3]

JIN JL, 1988, METALL SIN, V24, P66

[4] The mechanism responsible for high wear resistance of Pseudo-elastic TiNi alloy - a novel tribo-material [J].

Li, DY ;

Liu, R .

WEAR, 1999, 225 :777-783

[5] A new type of wear-resistant material: pseudo-elastic TiNi alloy [J].

Li, DY .

WEAR, 1998, 221 (02) :116-123

[6] Development of novel tribo composites with TiNi shape memory alloy matrix [J].

Li, DY .

WEAR, 2003, 255 :617-628

[7] Development of novel wear-resistant materials: TiNi-based pseudoelastic tribomaterials [J].

Li, DY .

MATERIALS & DESIGN, 2000, 21 (06) :551-555

[8] Wear behavior of a TiNi alloy [J].

Liang, YN ;

Li, SZ ;

Jin, YB ;

Jin, W ;

Li, S .

WEAR, 1996, 198 (1-2) :236-241

[9] A finite element model study on wear resistance of pseudoelastic TiNi alloy [J].

Liu, R ;

Li, DY .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 277 (1-2) :169-175

[10] WATER JET EROSION BEHAVIOR OF TI-NI BINARY-ALLOYS [J].

SHIDA, Y ;

SUGIMOTO, Y .

WEAR, 1991, 146 (02) :219-228

← 1 2 →