The Electrophoretic Deposition of Lanthanum Manganite Powders for a Cathode-Supported Solid Oxide Fuel Cell in Planar and Tubular Configurations

被引：7

作者：

Krkljus, Ivana ^{[1
]}

Brankovic, Zorica ^{[1
]}

Duris, Katarina ^{[1
]}

Vukotic, Vesna ^{[1
]}

Brankovic, Goran ^{[1
]}

Bernik, Slavko ^{[2
]}

机构：

[1] Univ Belgrade, Ctr Multidisciplinary Studies, Belgrade 11030, Serbia

[2] Jozef Stefan Inst, Ljubljana 1000, Slovenia

来源：

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2008年 / 5卷 / 06期

关键词：

D O I：

10.1111/j.1744-7402.2008.02218.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The purpose of this research was to obtain porous, high-quality cathodes for solid oxide fuel cells in both planar and tubular shapes. To accomplish this, cathodic electrophoretic deposition of the LaMnO3 powder (synthesized by the modified sol-gel method proposed by Pechini) was performed. The optimal sintering temperatures were 1200 degrees C and 1300 degrees C for the tubular and planar configurations, respectively. Single-phase deposits with about 40% porosity were obtained in both configurations. The cathode quality was confirmed by depositing an electrolyte layer of YSZ. After the cosintering of both layers, an extremely dense electrolyte layer was obtained, and the cathode layer retained its high porosity.

引用

页码：548 / 556

页数：9

共 50 条

[31] Geometry-Dependent Oxygen Diffusion Flux and Limiting Current Density of the Cathode in a Cathode-Supported Solid Oxide Fuel Cell [J].

Huang, Kevin ;

Shull, James L. .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2011, 158 (02) :B84-B90

[32] Optimization of Cathode Structure for Anode-Supported Planar Solid Oxide Fuel Cell [J].

Fan, Shengliang ;

Wang, Guoli ;

Yang, Lei ;

Liu, Pengwei ;

Han, Xu ;

Jin, Zunlong .

JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE, 2022, 19 (02)

[33] Anode supported solid oxide fuel cells (SOFC) by electrophoretic deposition [J].

Majhi, S. M. ;

Behura, S. K. ;

Bhattacharjee, S. ;

Singh, B. P. ;

Chongdar, T. K. ;

Gokhale, N. M. ;

Besra, L. .

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2011, 36 (22) :14930-14935

[34] Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review [J].

San Ping Jiang .

Journal of Materials Science, 2008, 43 :6799-6833

[35] Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review [J].

Jiang, San Ping .

JOURNAL OF MATERIALS SCIENCE, 2008, 43 (21) :6799-6833

[36] High-performance cathode-supported solid oxide fuel cells with copper cermet anodes [J].

Zhao, Lin ;

Ye, Xiaofeng ;

Zhan, Zhongliang .

JOURNAL OF POWER SOURCES, 2011, 196 (15) :6201-6204

[37] Effects of CuO addition to anode on the electrochemical performances of cathode-supported solid oxide fuel cells [J].

Zhao, C. H. ;

Liu, R. Z. ;

Shao, L. ;

Wang, S. R. ;

Wen, T. L. .

ELECTROCHEMISTRY COMMUNICATIONS, 2009, 11 (12) :2300-2303

[38] Gelcasting of Strontium Doped Lanthanum Manganite for Solid Oxide Fuel Cell Applications [J].

Haleem, B. Abdul ;

Bhuvana, R. ;

Udayakumar, A. .

TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2009, 68 (03) :139-144

[39] Fabrication and electrochemical properties of cathode-supported solid oxide fuel cells via slurry spin coating [J].

Chen, Min ;

Luo, Jing-Li ;

Chuang, Karl T. ;

Sanger, Alan R. .

ELECTROCHIMICA ACTA, 2012, 63 :277-286

[40] The influence of discharge operation on the microstructure of strontium-doped lanthanum manganite cathode for solid oxide fuel [J].

Yang, Jun ;

Muroyama, Hiroki ;

Matsui, Toshiaki ;

Eguchi, Koichi .

JOURNAL OF POWER SOURCES, 2012, 204 :25-33

← 1 2 3 4 5 →