Micro-Micro Hierarchy Replacing Micro-Nano Hierarchy: A Precisely Controlled Way To Produce Wear-Resistant Superhydrophobic Polymer Surfaces

Superhydrophobic polymer surfaces are typically fabricated by combining hierarchical micro-nanostructures. The surfaces have a great technological potential because of their special water-repellent and self-cleaning properties. However, the poor mechanical robustness of such surfaces has severely limited their use in practical applications. This study presents a simple and swift mass production method for manufacturing hierarchically structured polymer surfaces at micrometer scale. Polypropylene surface structuring was done using injection molding, where the microstructured molds were made with a microworking robot. The effect of the micro-microstructuring on the polymer surface wettability and mechanical robustness was studied and compared to the corresponding properties of micro-nanostructured surfaces. The static contact angles of the micro-microstructured surfaces were greater than 150 degrees and the contact angle hysteresis was low, showing that the effect of hierarchy on the surface wetting properties works equally well at micrometer scale. Hierarchically micro-microstructured polymer surfaces exhibited the same superhydrophobic wetting properties as did the hierarchically micro-nanostructured surfaces. Micro-microstructures had superior mechanical robustness in wear tests as compared to the micro-nanostructured surfaces. The new microstructuring technique offers a precisely controlled way to produce superhydrophobic wetting properties to injection moldable polymers with sufficiently high intrinsic hydrophobicity.