Experimental investigation on propagating characteristics of sinusoidal unsteady flow in open-channel with smooth bed

被引:7
作者
Hu Jiang [1 ,2 ]
Yang ShengFa [1 ]
Fu XuHui [1 ]
机构
[1] Chongqing Jiaotong Univ, Natl Inland Waterway Regulat Engn Res Ctr, Chongqing 400074, Peoples R China
[2] Tsinghua Univ, State Key Lab Hydrosci & Engn, Beijing 100084, Peoples R China
关键词
open-channel; unsteady flow; propagating characteristic; experimental investigation; NUMERICAL-MODEL; SHEAR-STRESS; PIPE; NONUNIFORM; TURBULENCE; VELOCITY; DRAG;
D O I
10.1007/s11431-012-4873-y
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A high accuracy experimental system has been established for unsteady open-channel flow. Then 40 experiments were conducted to study the propagating characteristics of unsteady open-channel flow. From the experimental data, the variation law of propagating velocity, wave deformation rate, flow depth of wave peak and bottom, and other parameters were obtained. The experimental results show the followings. 1) The propagating velocity of unsteady open-channel flows can be expressed by the sum of flow velocity and micro-amplitude wave velocity at wave peak. 2) The waveform of an unsteady flow would deform when it propagates, with the rising stage becoming longer and the falling stage shorter; the deformation rate is a function of distance, period and relative amplitude of discharge. 3) The flow depths of wave peak and bottom have a close relationship with the period of the unsteady flow. When the period is short, water depths of wave peak and bottom are both close to those of the average discharge in the condition of uniform flow. For a long period unsteady flow, the water depth of wave peak is close to that of the maximal discharge in the condition of uniform flow, while at the flow wave bottom, it is close to the depth of the minimum discharge in an uniform flow. 4) Propagating characteristic of discharge is analogous to that of flow depth for unsteady flow.
引用
收藏
页码:2028 / 2038
页数:11
相关论文
共 50 条
[31]   A study on the stability of laminar open-channel flow over a sandy rippled bed [J].
Bai, YC ;
Xu, HJ .
SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 2005, 48 (01) :83-103
[32]   Direct numerical simulation of open-channel flow over smooth-to-rough and rough-to-smooth step changes [J].
Rouhi, Amirreza ;
Chung, Daniel ;
Hutchins, Nicholas .
JOURNAL OF FLUID MECHANICS, 2019, 866 :450-486
[33]   Numerical Study on the Shear Stress Characteristics of Open-Channel Flow over Rough Beds [J].
Wen, Jiaqi ;
Chen, Yongcan ;
Liu, Zhaowei ;
Li, Manjie .
WATER, 2022, 14 (11)
[34]   Experimental Investigation of Effects of Unsteady Flow on Bed-Load Transport Process [J].
Xiao, Y. ;
Hu, J. ;
Yang, F. S. .
JOURNAL OF WATERWAY PORT COASTAL AND OCEAN ENGINEERING, 2020, 146 (04)
[35]   On the scaling of large-scale structures in smooth-bed turbulent open-channel flows [J].
Peruzzi, C. ;
Poggi, D. ;
Ridolfi, L. ;
Manes, C. .
JOURNAL OF FLUID MECHANICS, 2020, 889
[36]   NUMERICAL INVESTIGATION OF RECTANGULAR RIB ROUGHNESS EFFECTS ON FLOW RESISTANCE IN OPEN-CHANNEL FLOW [J].
Hamani, S. ;
Labiod, C. .
INTERNATIONAL JOURNAL OF FLUID MECHANICS RESEARCH, 2022, 49 (01) :29-45
[37]   Influence of bed elevation discordance on flow patterns and head losses in an open-channel confluence [J].
Ramos, Pedro Xavier ;
Schindfessel, Laurent ;
Pego, Joao Pedro ;
De Mulder, Tom .
WATER SCIENCE AND ENGINEERING, 2019, 12 (03) :235-243
[38]   Origination of Cellular Secondary Cells in Wide Open-Channel Turbulent Unsteady Flows over Spanwise-Oriented Alternate Rough and Smooth Bed Strips [J].
Chattopadhyay T. ;
Kundu S. .
Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2024, 48 (5) :3643-3660
[39]   Very-large-scale motions in rough-bed open-channel flow [J].
Cameron, S. M. ;
Nikora, V. I. ;
Stewart, M. T. .
JOURNAL OF FLUID MECHANICS, 2017, 814 :416-429
[40]   Direct Derivation of Streamwise Velocity from RANS Equation in an Unsteady Nonuniform Open-Channel Flow [J].
Jain, Punit ;
Kundu, Snehasis ;
Ghoshal, Koeli ;
Absi, Rafik .
JOURNAL OF ENGINEERING MECHANICS, 2022, 148 (12)