Formation and Mechanical Properties of Bulk Glassy and Quasicrystalline Alloys in Zr-Al-Cu-Ti System

被引：0
作者：
Qiang, J. B. [1 ]
Zhang, W. [1 ]
Xie, G. Q. [1 ]
Inoue, A. [1 ]
机构：
[1] Tohoku Univ, Inst Mat Res, Aoba Ku, Sendai, Miyagi 9808577, Japan
来源：
FRONTIERS IN MATERIALS RESEARCH | 2008年 / 10卷
关键词：
METALLIC GLASSES; SUPERCOOLED LIQUID; FORMING ABILITY; PHASE; STABILITY;
D O I：
暂无
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
The glass-forming, ability (GFA) of Zr(65)Al(7.5)Cu(27.5) alloy can be improved effectively by a certain amount of Ti addition. Bulk glassy samples of 3 nun in diameter were obtained in the compositions containing 3-7 at% Ti by copper mold casting, while further Ti additions will deteriorate GFA and lead to the formation of quasicrystals at (Zr(65)Al(7.5)Cu(27.5))(90)Ti(10). Meanwhile, the addition of Ti in the Zr(65)Al(7.5)Cu(27.5) alloy was found to alter the crystallization behavior of the metallic glasses; thus bulk quasicrystalline alloy can also be achieved by glass devitrification of Ti-containing BMGs. Room-temperature compression testing showed that; bulk quasicrystalline alloy, fabricated either by mold casting or by glass devitrification method, exhibited higher fracture strength and Young's modulus than that of the relative monolithic BMGs.
引用
收藏
页码：235 / 244
页数：10
相关论文
共 50 条
  • [41] Bulk glass formation and mechanical properties for Cu-Hf-Ti-M (M = B,Y) alloys
    Figueroa, I. A.
    Rawal, R.
    Stewart, P.
    Carroll, P. A.
    Davies, H. A.
    Jones, H.
    Todd, I.
    [J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2007, 353 (8-10) : 839 - 841
  • [42] Microstructures and Mechanical Properties of ZrC Reinforced (Zr-Ti)-Al-Ni-Cu Glassy Composites by an In Situ Reaction
    Liu, Tao
    Shen, Ping
    Qiu, Feng
    Zhang, Tao
    Jiang, Qichuan
    [J]. ADVANCED ENGINEERING MATERIALS, 2009, 11 (05) : 392 - 398
  • [43] Physical properties of Zr50Cu40-xAl10Pdx bulk glassy alloys
    Wencka, M.
    Jagodic, M.
    Gradisek, A.
    Kocjan, A.
    Jaglicic, Z.
    McGuiness, P. J.
    Apih, T.
    Yokoyama, Y.
    Dolinsek, J.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 (01) : 16 - 21
  • [44] High strength and good ductility of bulk quasicrystalline base alloys in Zr65Al7.5Ni10Cu17.5-xPdx system
    Inoue, A
    Zhang, T
    Saida, J
    Matsushita, M
    Chen, MW
    Sakurai, T
    [J]. MATERIALS TRANSACTIONS JIM, 1999, 40 (10): : 1137 - 1143
  • [45] Formation and properties of Ti-based Ti-Zr-Cu-Fe-Sn-Si bulk metallic glasses with different (Ti plus Zr)/Cu ratios for biomedical application
    Liu, Ying
    Pang, Shujie
    Li, Haifei
    Hu, Qiao
    Chen, Bin
    Zhang, Tao
    [J]. INTERMETALLICS, 2016, 72 : 36 - 43
  • [46] Dual-phase glassy/nanoscale icosahedral phase materials in Cu-Zr-Ti-Pd system alloys
    Louzguine-Luzgin, Dmitri V.
    Churyumov, A. Yu.
    [J]. MATERIALS CHARACTERIZATION, 2014, 96 : 6 - 12
  • [47] Formation, mechanical properties and corrosion resistance of Ti-Pd base glassy alloys
    Oak, Jeong-Jung
    Inoue, Akihisa
    [J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2008, 354 (17) : 1828 - 1832
  • [48] Effect of plasma electrolytic oxidation treatment on the mechanical properties of a Zr-Cu-Ni-Ti-Al bulk metallic glass
    Chen, Shuangshuang
    Wu, Jiajia
    Tu, Jianxin
    Wang, Hairui
    Xiong, Xinbo
    Hu, Qiang
    Zou, Jizhao
    Zeng, Xierong
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 672 : 32 - 39
  • [49] Local structure and site substitution in amorphous and quasicrystalline Zr-Ti-Ni-(Cu) alloys
    Mechler, S.
    Schumacher, G.
    Koteski, V.
    Riesemeier, H.
    Schaefers, F.
    Mahnke, H. -E.
    [J]. APPLIED PHYSICS LETTERS, 2010, 97 (04)
  • [50] Improved mechanical properties and corrosion resistance of Zr-Cu-Al-Ni-Ti bulk metallic glasses by Co addition
    Xu, Yang
    Hong, Yuan
    Shi, Hongqi
    Chen, Jiajia
    Tang, Tao
    Li, Maomao
    Zhan, Jianming
    [J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2024, 632
12345