Formation and Mechanical Properties of Bulk Glassy and Quasicrystalline Alloys in Zr-Al-Cu-Ti System

被引：0

作者：

Qiang, J. B. ^{[1
]}

Zhang, W. ^{[1
]}

Xie, G. Q. ^{[1
]}

Inoue, A. ^{[1
]}

机构：

[1] Tohoku Univ, Inst Mat Res, Aoba Ku, Sendai, Miyagi 9808577, Japan

来源：

FRONTIERS IN MATERIALS RESEARCH | 2008年 / 10卷

关键词：

METALLIC GLASSES; SUPERCOOLED LIQUID; FORMING ABILITY; PHASE; STABILITY;

D O I：

暂无

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

The glass-forming, ability (GFA) of Zr(65)Al(7.5)Cu(27.5) alloy can be improved effectively by a certain amount of Ti addition. Bulk glassy samples of 3 nun in diameter were obtained in the compositions containing 3-7 at% Ti by copper mold casting, while further Ti additions will deteriorate GFA and lead to the formation of quasicrystals at (Zr(65)Al(7.5)Cu(27.5))(90)Ti(10). Meanwhile, the addition of Ti in the Zr(65)Al(7.5)Cu(27.5) alloy was found to alter the crystallization behavior of the metallic glasses; thus bulk quasicrystalline alloy can also be achieved by glass devitrification of Ti-containing BMGs. Room-temperature compression testing showed that; bulk quasicrystalline alloy, fabricated either by mold casting or by glass devitrification method, exhibited higher fracture strength and Young's modulus than that of the relative monolithic BMGs.

引用

页码：235 / 244

页数：10

共 50 条

[1] Effect of yttrium addition on the formation and mechanical properties of Ti-Zr-Ni-Cu bulk quasicrystalline alloys
Wang, Xinlu
Zhang, Shanshan
Wang, Lidong
Liu, Wanqiang
Wu, Yaoming
Wang, Limin
JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 522 : 96 - 100
[2] Bulk glassy and quasicrystalline (Zr65Al7.5Cu27.5)100-xTix alloys and their mechanical properties
Qiang, J. B.
Zhang, W.
Xie, G. Q.
Inoue, A.
MATERIALS TRANSACTIONS, 2007, 48 (07) : 1789 - 1792
[3] Formation, Thermal Stability and Mechanical Properties of Bulk Glassy Alloys with a Diameter of 20 mm in Zr-(Ti,Nb)-Al-Ni-Cu System
Inoue, A.
Zhang, Q. S.
Zhang, W.
Yubuta, K.
Son, K. S.
Wang, X. M.
MATERIALS TRANSACTIONS, 2009, 50 (02) : 388 - 394
[4] Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys
Zadorozhnyy, V. Yu
Inoue, A.
Louzguine-Luzgin, D. V.
INTERMETALLICS, 2012, 31 : 173 - 176
[5] Thermal and mechanical properties of Cu-based Cu-Zr-Ti-Y bulk glassy alloys
Zhang, T
Kurosaka, K
Inoue, A
MATERIALS TRANSACTIONS, 2001, 42 (10) : 2042 - 2045
[6] Formation, thermal stability and mechanical properties in Zr-Al-Co bulk glassy alloys
Wada, T
Zhang, T
Inoue, A
MATERIALS TRANSACTIONS, 2002, 43 (11) : 2843 - 2846
[7] Thermal stability and mechanical properties of bulk glassy Cu-Zr-Ti-(Nb, Ta) alloys
Zhang, T
Inoue, A
MATERIALS TRANSACTIONS, 2002, 43 (06) : 1367 - 1370
[8] Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron
Zadorozhnyy, V. Yu
Inoue, A.
Louzguine-Luzgin, D. V.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 472 - 477
[9] Formation and Mechanical Properties of Zr-Nb-Cu-Ni-Al-Lu Bulk Glassy Alloys with Superior Glass-Forming Ability
Zhao Xiangjin
Liu Wei
Liu Li
Zhang Tao
Pang Shujie
Ma Chaoli
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2016, 31 (01): : 186 - 190
[10] Effects of Nb on the formation of icosahedral quasicrystalline phase in Ti-rich Ti-Zr-Ni-Cu-Be glassy forming alloys
Mei, J. N.
Li, J. S.
Kou, H. C.
Fu, H. Z.
Zhou, L.
JOURNAL OF NON-CRYSTALLINE SOLIDS, 2008, 354 (28) : 3332 - 3335

← 1 2 3 4 5 →