Influence of thermomechanical processing and heat treatment on microstructure, tensile properties and fracture toughness of Ti-1100-0.1B alloy

被引：40

作者：

Chandravanshi, V. K. ^{[1
]}

Bhattacharjee, A. ^{[1
]}

Kamat, S. V. ^{[1
]}

Nandy, T. K. ^{[1
]}

机构：

[1] Def Met Res Lab, Hyderabad 500058, Andhra Pradesh, India

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2014年 / 589卷

关键词：

Thermomechanical processing; Heat treatment; Ti-1100-0.1B alloy; Microstructure; Tensile properties; Fracture toughness; MODIFIED TI-6AL-4V ALLOYS; 834; TITANIUM-ALLOY; FATIGUE BEHAVIOR; CREEP-PROPERTIES; BORON; ALPHA; BETA; DEFORMATION; COMPOSITES; TIB;

D O I：

10.1016/j.jallcom.2013.11.014

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The effects of thermomechanical processing and heat treatment on the microstructure, tensile properties and fracture toughness of 0.1 wt.% boron modified Ti-1100 alloy (Ti-1100-0.1B) processed by vacuum arc melting was investigated at room temperature and compared with that of the base alloy. The tensile properties of the base alloy (Ti-1100) were significantly lower in the beta-processed as compared to alpha-beta-processed conditions whereas the tensile properties of boron modified alloy (Ti-1100-0.1B) were similar irrespective of whether it was alpha-beta or beta-processed. The B addition resulted in a higher strengthening in beta-processed alloy as compared to alpha-beta-processed alloy. The fracture toughness of Ti-1100-0.1B alloy was also found to be lower than that of the base Ti-1100 alloy irrespective of the processing conditions and solution treatment temperatures. Neither the solution treatment temperature nor the processing condition had a significant effect on the fracture toughness of the B modified Ti-1100-alloy whereas in the case of the base alloy, the fracture toughness was distinctly higher in the beta processed condition for all the solution treatment temperatures. The results were explained on the basis of the effect of processing and heat treatment on the microstructure as well as the role of TiB whiskers in influencing the strengthening as well as fracture mechanisms in Ti-1100 alloy. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：336 / 345

页数：10

共 37 条

[31] High temperature deformation processing maps for boron modified Ti-6Al-4V alloys [J].

Sen, Indrani ;

Kottada, Ravi Sankar ;

Ramamurty, U. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (23) :6157-6165

[32] Elastic modulus of Ti-6Al-4V-xB alloys with B up to 0.55 wt.% [J].

Sen, Indrani ;

Ramamurty, U. .

SCRIPTA MATERIALIA, 2010, 62 (01) :37-40

[33]

Srinivasan R., 2007, TITANIUM SCI TECHNOL, P977

[34] Direct rolling of as-cast Ti-6Al-4V modified with trace additions of boron [J].

Srinivasan, Raghavan ;

Miracle, Daniel ;

Tamirisakandala, Sesh .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 487 (1-2) :541-551

[35] Processing, microstructure, and properties of β titanium alloys modified with boron [J].

Tamirisakandala, S ;

Bhat, RB ;

Tiley, JS ;

Miracle, DB .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2005, 14 (06) :741-746

[36] Effect of boron on the beta transus of Ti-6Al-4V alloy [J].

Tamirisakandala, S ;

Bhat, RB ;

Miracle, DB ;

Boddapati, S ;

Bordia, R ;

Vanover, R ;

Vasudevan, VK .

SCRIPTA MATERIALIA, 2005, 53 (02) :217-222

[37] Grain refinement of cast titanium alloys via trace boron addition [J].

Tamirisakandala, S ;

Bhat, RB ;

Tiley, JS ;

Miracle, DB .

SCRIPTA MATERIALIA, 2005, 53 (12) :1421-1426

← 1 2 3 4 →