EVALUATION OF MOLD FLUX FOR CONTINUOUS CASTING OF HIGH-ALUMINUM STEEL

被引：0

作者：

Yan, Wei ^{[1
,2
]}

McLean, Alexander ^{[1
]}

Yang, Yindong ^{[1
]}

Chen, Weiqing ^{[2
]}

Barati, Mansoor ^{[1
]}

机构：

[1] Univ Toronto, Dept Mat Sci & Engn, Toronto, ON M5S 3E4, Canada

[2] Univ Sci & Technol, State Key Lab Adv Met, Beijing 100083, Peoples R China

来源：

ADVANCES IN MOLTEN SLAGS, FLUXES, AND SALTS | 2016年

关键词：

mold flux; high-aluminum steel; CaO-Al2O3-based; viscosity crystallization; fluoride-free; CRYSTALLIZATION; VISCOSITY; CONDUCTIVITY; CAO-AL2O3; SYSTEM; SLAG;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Study of mold fluxes for continuous casting of high-aluminum steel has attracted increasing attention due to severe reaction between aluminum in liquid steel and silica in the flux which results in changes in composition, properties and performance of the flux and adversely affects slab quality. This research began with sampling during the casting process of high-Al nonmagnetic steel 20Mn23AlV to evaluate potential problems. A mold flux was developed in which SiO2 was partially replaced with Al2O3. Different compositions including CaO/Al2O3, fluoride-free and low-fluoride lime-alumina-based fluxes were evaluated with respect to their influence on flux viscosity, crystallization and subsequent effects on steel quality. It was concluded that mold flux with CaO/Al2O3 ratio in the range 1.1 to 1.6 and characterized by low viscosity, low initial crystallization temperature and good heat transfer properties was appropriate for casting of high-aluminum steel. A viscosity model with high reliability in predicting the viscosity of mold flux containing high Al2O3 was also established.

引用

页码：279 / 289

页数：11

共 18 条

[1]

Blazek K., 2011, AIST Trans, V8, P232

[2] Assessment of CaO-Al2O3 Based Mold Flux System for High Aluminum TRIP Casting [J].

Cho, Jung-Wook ;

Blazek, Kenneth ;

Frazee, Michael ;

Yin, Hongbin ;

Park, Jeong Hyouk ;

Moon, Sang-Woon .

ISIJ INTERNATIONAL, 2013, 53 (01) :62-70

[3] Properties of F-free glass system as a mold flux: viscosity, thermal conductivity and crystallization behavior [J].

Choi, SY ;

Lee, DH ;

Shin, DW ;

Choi, SY ;

Cho, JW ;

Park, JM .

JOURNAL OF NON-CRYSTALLINE SOLIDS, 2004, 345 :157-160

[4] Solidification and crystallization properties of CaO-SiO2-Na2O based mold fluxes [J].

He, Sheng-ping ;

Wang, Qian ;

Xie, Dan ;

Xu, Chu-shao ;

Li, Z. S. ;

Mills, K. C. .

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2009, 16 (03) :261-264

[5] Role of B2O3 on the Viscosity and Structure in the CaO-Al2O3-Na2O-Based System [J].

Kim, Gi Hyun ;

Sohn, Il .

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2014, 45 (01) :86-95

[6]

Lee I. R., 1993, C CONT CAST STEEL DE

[7] Effects of Fluorine and BaO on the Crystallization Behavior of Lime-Alumina-Based Mold Flux for Casting High-Al Steels [J].

Lu, Boxun ;

Wang, Wanlin .

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2015, 46 (02) :852-862

[8] Viscosities of ironmaking and steelmaking slags [J].

Mills, KC ;

Sridhar, S .

IRONMAKING & STEELMAKING, 1999, 26 (04) :262-268

[9] Modeling of Manganese Ferroalloy Slag Properties and Flow During Tapping [J].

Muller, Jacques ;

Zietsman, Johannes Hendrik ;

Pistorius, Petrus Christiaan .

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2015, 46 (06) :2639-2651

[10] Crystallization of CaO-SiO2-TiO2 slag as a candidate for fluorine free mold flux [J].

Nakada, Hideko ;

Nagata, Kazuhiro .

ISIJ INTERNATIONAL, 2006, 46 (03) :441-449

← 1 2 →