Microstructural evolution during reactive brazing of alumina to Inconel 600 using Ag-based alloy

被引：91
作者：
Laik, A. [1 ]
Mishra, P. [2 ]
Bhanumurthy, K. [3 ]
Kale, G. B. [1 ]
Kashyap, B. P. [4 ]
机构：
[1] Bhabha Atom Res Ctr, Div Mat Sci, Mumbai 400085, Maharashtra, India
[2] Bhabha Atom Res Ctr, Mat Proc Div, Mumbai 400085, Maharashtra, India
[3] Bhabha Atom Res Ctr, Sci Informat Resource Div, Mumbai 400085, Maharashtra, India
[4] Indian Inst Technol, Dept Met Engn & Mat Sci, Bombay 400076, Maharashtra, India
来源：
ACTA MATERIALIA | 2013年 / 61卷 / 01期
关键词：
Brazing; Microstructure; Phase stability; Alumina; Inconel; THERMODYNAMIC EVALUATION; INTERFACIAL REACTIONS; RESIDUAL-STRESSES; PHASE-STABILITY; METAL JOINTS; CU; COPPER; BEHAVIOR; GLASS;
D O I：
10.1016/j.actamat.2012.09.040
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A metal ceramic bonding process was developed to produce vacuum tight alumina Inconel 600 joints using an Ag-based active metal brazing alloy that can withstand continuous operating temperature up to 560 degrees C. The microstructure and microchemistry of the braze zone was examined using extensive microanalysis of the constituent phases and a mechanism for the interfacial reactions responsible for the bonding is proposed. Prolonged heat treatment at 400 and 560 degrees C under simulated in-service conditions revealed that the microstructure of braze zone of the joints was stable and maintained leak-tightness and strength. The bond strength of the interface was high enough to cause failure in the alumina side of the joints. Failure of the joints was caused by initiation of crack on the surface of alumina as a result of high tensile residual stress adjacent to the metal ceramic interface. (C) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：126 / 138
页数：13
相关论文
共 60 条
[31]   THERMAL-STRESSES IN CERAMIC-METAL JOINTS WITH AN INTERLAYER [J].
MUNZ, D ;
SCKUHR, MA ;
YANG, YY .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1995, 78 (02) :285-290
[32]   Wetting, spreading and joining in the alumina-zirconia-Inconel 738 system [J].
Muolo, ML ;
Ferrera, E ;
Morbelli, L ;
Passerone, A .
SCRIPTA MATERIALIA, 2004, 50 (03) :325-330
[33]  
Naidich Y.V., 1981, PROGR SURFACE MEMBRA, V14, P353, DOI DOI 10.1016/B978-0-12-571814-1.50011-7
[34]  
NAKA M, 1990, T JWRI, V19, P29
[35]  
Nicholas M.G., 1980, Journal of Material Science, V15, P2167
[36]  
NICHOLAS MG, 1985, MATER SCI TECH SER, V1, P657, DOI 10.1179/026708385790124305
[37]  
NICHOLAS MG, 1990, JOINING CERAMICS, P73
[38]   Strain energy distribution in ceramic-to-metal joints [J].
Park, JW ;
Mendez, PF ;
Eagar, TW .
ACTA MATERIALIA, 2002, 50 (05) :883-899
[39]  
Peck LE, 2000, US Patent, Patent No. 6156978
[40]   Ag-Al-Cu (silver-aluminum-copper) [J].
Raghavan, V. .
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 2008, 29 (03) :256-258
123456