Effects of ultraviolet radiation and associated elevated temperature on mechanical performance of steel/CFRP double strap joints

被引:100
|
作者
Tien-Cuong Nguyen [1 ]
Bai, Yu [1 ]
Zhao, Xiao-Ling [1 ]
Al-Mahaidi, Riadh [2 ]
机构
[1] Monash Univ, Dept Civil Engn, Clayton, Vic 3800, Australia
[2] Swinburne Univ Technol, Fac Engn & Ind Sci, Hawthorn, Vic 3122, Australia
基金
澳大利亚研究理事会;
关键词
CFRP; Steel; Double strap joint; Mechanical properties; Ultraviolet; Elevated temperatures; COOLED GFRP SLABS; COMPOSITES; LIGHT; CONSTRUCTION; DURABILITY; POLYESTER; ADHESIVE; BEHAVIOR; FIRE;
D O I
10.1016/j.compstruct.2012.05.036
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Although extensive studies of the bond between steel and CFRP under various environmental exposures have been carried out, the effects of UV have not been examined to date. This knowledge gap is addressed in this paper. Specimens (epoxy adhesive, CFRP laminates and steel/CFRP adhesively-bonded joints) were exposed to UV for various time periods and identical reference specimens were exposed to only thermal environments without UV. It was found that UV exposure does not influence the tensile strength of CFRP composites. The tensile strength of the adhesive reduced by 13.9% while modulus showed a significant increase by 105% after 744 h of exposure. The tensile modulus of adhesive exposed to only thermal environment also increased by 38%, considerably less than that induced by UV exposure. The UV exposure also led to a decrease in joint strength but an increase in stiffness, caused by the temperature effect rather than the UV rays. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:3563 / 3573
页数:11
相关论文
共 47 条
  • [41] Effects of low-temperature freeze-thaw cycles and chloride attack on the bond performance between steel/BFRP/CFRP/GFRP bar and concrete
    Wu, Jieqiong
    Yang, Jian
    Chen, Xiang
    Jin, Liu
    Du, Xiuli
    STRUCTURES, 2025, 73
  • [42] Effect of high gamma radiation dosage and elevated temperature on the mechanical performance of sustainable alkali-activated composite as a cleaner product
    Ramadan, M.
    Amin, M. S.
    Waly, S. A.
    Mohsen, Alaa
    CEMENT & CONCRETE COMPOSITES, 2021, 121
  • [43] Mechanical properties of steel fiber-reinforced UHPC mixtures exposed to elevated temperature: Effects of exposure duration and fiber content
    Ahmad, Shamsad
    Rasul, Mehboob
    Adekunle, Saheed Kolawole
    Al-Dulaijan, Salah U.
    Maslehuddin, Mohammed
    Ali, Syed Imran
    COMPOSITES PART B-ENGINEERING, 2019, 168 : 291 - 301
  • [44] Effects of the associated incorporation of steel wool and carbon nanotube on the healing capacity and mechanical performance of an asphalt mixture
    Schuster, Luana
    de Melo, Joao Victor Staub
    Carpio, Joe Arnaldo Villena Del
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 168
  • [45] Synergistic effects of hybrid polypropylene and steel fibers on explosive spalling prevention of ultra-high performance concrete at elevated temperature
    Li, Ye
    Tan, Kang Hai
    Yang, En-Hua
    CEMENT & CONCRETE COMPOSITES, 2019, 96 : 174 - 181
  • [46] Study on mechanical properties of (1 % PVA fiber+1 % Steel fiber) PS-ECC under the coupling effects of elevated temperature and dynamic loads
    Chen, Jianxing
    Zhu, Zheming
    Zhou, Lei
    Zhuang, Jinping
    Wang, Meng
    Ma, Leijun
    STRUCTURAL CONCRETE, 2023, 24 (03) : 4126 - 4144
  • [47] Curing effects on forming and mechanical performance of clinch-adhesive joints of dissimilar materials between AA5754 Aluminum Alloy and Q235 steel
    Zhuang, Weimin
    Shi, Hongda
    Li, Ming
    JOURNAL OF ADHESION, 2023, 99 (01) : 1 - 33