Hexavalent chromium removal by various adsorbents: Powdered activated carbon, chitosan, and single/multi-walled carbon nanotubes

被引:292
作者
Jung, Chanil [1 ]
Heo, Jiyong [1 ]
Han, Jonghun [2 ]
Her, Namguk [2 ]
Lee, Sung-Jae [3 ]
Oh, Jeill [4 ]
Ryu, Jaena [4 ]
Yoon, Yeomin [1 ]
机构
[1] Univ S Carolina, Dept Civil & Environm Engn, Columbia, SC 29208 USA
[2] Korea Army Acad Young Cheon, Dept Chem & Environm Sci, Young Cheon 770849, Gyeongbuk, South Korea
[3] Halla Energy & Environm Corp, Seoul 138811, South Korea
[4] Chung Ang Univ, Dept Civil & Environm Engn, Seoul 156756, South Korea
关键词
Hexavalent chromium; Powdered activated carbon; Chitosan; Single-walled carbon nanotubes; Multi-walled carbon nanotubes; AQUEOUS-SOLUTION; WASTE-WATER; ADSORPTION; CR(VI); KINETICS; THERMODYNAMICS; IONS; ACID; OPTIMIZATION; EQUILIBRIUM;
D O I
10.1016/j.seppur.2012.12.028
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The adsorption behavior of ppb-level aqueous solutions of hexavalent chromium [Cr(VI)] on four different adsorbents was investigated as a function of pH, contact time, initial Cr(VI) concentration, adsorbent dose, and the copresence of competing anions. The adsorbents selected were powered activated carbon (PAC), chitosan, single-walled carbon nanotubes (SWNTs), and multi-walled carbon nanotubes (MWNTs). Each adsorbent was characterized by Fourier transform infrared spectroscopy and measurements of zeta potential to determine its suitability for Cr(VI) adsorption. The adsorption of Cr(VI) was found to be favored at low pH because all adsorbents were positively charged under acidic conditions (pH 4), while a dosage of 100 mg/L resulted in efficient adsorption behavior. PAC and chitosan provided the best removal performance. The highly functionalized and porous PAC and the protonated amines on chitosan enabled a better performance and resulted in high Cr(VI) removal efficiencies of 99.4% and 94.7%, respectively, while the removal efficiencies of SWNTs and MWNTs were 72.9% and 51.9%, respectively. Isotherm and kinetic studies were undertaken to evaluate the characteristics of the Cr(VI) adsorption process. A well-fitted Langmuir isotherm model suggested that monolayer adsorption was the main process operating with an adsorption capacity (q(m)) of 46.9, 35.6, 20.3, and 2.48 mg/g for PAC, chitosan, SWNTs, and MWNTs, respectively. Pseudo second-order fitted models revealed the importance of kinetic parameters (apart from adsorption capacity) in understanding the transport of Cr(VI) in the solution, while an intra-particle diffusion model fitted well for mu g/L levels of Cr(VI) adsorption. This indicated that both physisorption and chemisorption were dominant, particularly for SWNTs. Anions such as Cl- and SO42- in the solution competed with HCrO4- and this phenomenon resulted in negative effects on Cr(VI) adsorption. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:63 / 71
页数:9
相关论文
共 71 条
[1]   Remediation options for the treatment of electroplating and leather tanning effluent containing chromium - A review [J].
Agrawal, A ;
Kumar, V ;
Pandey, BD .
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, 2006, 27 (02) :99-130
[2]   Adsorption kinetics and thermodynamics of an anionic dye onto sepiolite [J].
Alkan, Mahir ;
Demirbas, Ozkan ;
Dogan, Mehmet .
MICROPOROUS AND MESOPOROUS MATERIALS, 2007, 101 (03) :388-396
[3]   Adsorption of Cr(VI) from synthetic solutions and electroplating wastewaters on amorphous aluminium oxide [J].
Alvarez-Ayuso, E. ;
Garcia-Sanchez, A. ;
Querol, X. .
JOURNAL OF HAZARDOUS MATERIALS, 2007, 142 (1-2) :191-198
[4]   Adsorption of chromium (VI) ion from aqueous solution by succinylated mercerized cellulose functionalized with quaternary ammonium groups [J].
Alves Gurgel, Leandro Vinicius ;
Perin de Melo, Julio Cesar ;
de Lena, Jorge Carvalho ;
Gil, Laurent Frederic .
BIORESOURCE TECHNOLOGY, 2009, 100 (13) :3214-3220
[5]   Adsorptive removal of chromium (VI) from aqueous solution over powdered activated carbon: Optimisation through response surface methodology [J].
Anupam, Kumar ;
Dutta, Suman ;
Bhattacharjee, Chiranjib ;
Datta, Siddhartha .
CHEMICAL ENGINEERING JOURNAL, 2011, 173 (01) :135-143
[6]   Removal of Chromium (III) from Water by Using Modified and Nonmodified Carbon Nanotubes [J].
Atieh, Muataz Ali ;
Bakather, Omer Yahya ;
Tawabini, Bassam S. ;
Bukhari, Alaadin A. ;
Khaled, Mazen ;
Alharthi, Mamdouh ;
Fettouhi, Mohammed ;
Abuilaiwi, Faraj Ahmad .
JOURNAL OF NANOMATERIALS, 2010, 2010
[7]   Adsorption of chromium on chitosan: Optimization, kinetics and thermodynamics [J].
Aydin, Yasar Andelib ;
Aksoy, Nuran Deveci .
CHEMICAL ENGINEERING JOURNAL, 2009, 151 (1-3) :188-194
[8]   Cr(VI) removal from synthetic wastewater using coconut shell charcoal and commercial activated carbon modified with oxidizing agents and/or chitosan [J].
Babel, S ;
Kurniawan, TA .
CHEMOSPHERE, 2004, 54 (07) :951-967
[9]   Chemically functionalized carbon nanotubes [J].
Balasubramanian, K ;
Burghard, M .
SMALL, 2005, 1 (02) :180-192
[10]  
Basu S. K., 1989, INDIAN J ENV PROTECT, V9, P904