Wear behavior of plasma nitrided AISI 420 stainless steel

被引：20
|
作者：
Bruehl, Sonia P. [1 ]
Charadia, Raul [1 ]
Sanchez, Carlos [2 ]
Staia, Mariana H. [2 ]
机构：
[1] Univ Tecnol Nacl, Fac Reg Concepcion Uruguay, Surface Engn Grp, Concepcion Del Uruguay, Argentina
[2] Cent Univ Venezuela, Fac Ingn, CENMACOR, Caracas, Venezuela
来源：
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH | 2008年 / 99卷 / 07期
关键词：
plasma nitriding; adhesive wear; martensitic stainless steel; ball-on-disk;
D O I：
10.3139/146.101692
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Martensitic AISI420 stainless steel was plasma nitrided using a DC N2-Hz pulsed discharge, after thermal treatment at two different tempering temperatures. Sliding wear behavior was determined by means of a ball-on-disk tribometer at room temperature and without lubrication. Wear volume was calculated from the information provided by an optical profilometer and wear scars were analyzed by Scanning Electron Microscopy. The results indicated that the nitrided samples exhibited improved wear resistance when compared to the untreated specimens, but corrosion resistance was diminished due to the presence of the outer nitrided layer. However, when this layer was removed mechanically considerable improvement in the corrosion resistance was achieved without impairing the wear resistance of the whole system, which was 200 % higher compared to the wear resistance of the non-nitrided specimens.
引用
收藏
页码：779 / 786
页数：8
相关论文
共 50 条
  • [11] Microstructure and Wear Behavior of DC-Pulsed Plasma Nitrided AISI 316L Austenitic Stainless Steel
    De Las Heras, Evangelina
    Gonzalez Santamaria, Daniel
    Garcia-Luis, Alberto
    Cabo, Amado
    Brizuela, Marta
    Ybarra, Gabriel
    Mingolo, Norma
    Bruehl, Sonia
    Corengia, Pablo
    PLASMA PROCESSES AND POLYMERS, 2007, 4 : S741 - S745
  • [12] Microstructure and Hardness of High Temperature Gas Nitrided AISI 420 Martensitic Stainless Steel
    Ibrahim, Nor Nurulhuda Md.
    Hussain, Patthi
    Awang, Mohktar
    ICPER 2014 - 4TH INTERNATIONAL CONFERENCE ON PRODUCTION, ENERGY AND RELIABILITY, 2014, 13
  • [13] Delayed cracking in plasma nitriding of AISI 420 stainless steel
    Tuckart, W.
    Forlerer, E.
    Lurmsn, L.
    SURFACE & COATINGS TECHNOLOGY, 2007, 202 (01): : 199 - 202
  • [14] Effect of lubrication by mineral and synthetic oils on the sliding wear of plasma nitrided AISI 410 stainless steel
    Fu, YQ
    Bachelor, AW
    Loh, NL
    Tan, KW
    WEAR, 1998, 219 (02) : 169 - 176
  • [15] Wear and corrosion properties of AISI 420 martensitic stainless steel treated by active screen plasma nitriding
    Li, Yang
    He, Yongyong
    Xiu, JunJie
    Wang, Wei
    Zhu, YiJie
    Hu, Baoguo
    SURFACE & COATINGS TECHNOLOGY, 2017, 329 : 184 - 192
  • [16] Erosion Wear of AISI 420 Stainless Steel Caused by Walnut Shell Particles
    Laguna-Camacho, J. R.
    Hernandez-Romero, I.
    Escalante-Martinez, J. E.
    Marquez-Vera, C. A.
    Galvan-Lopez, J. L.
    Mendez-Mendez, J. V.
    Arzate-Vazquez, I.
    Andraca-Adame, J. A.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 (04) : 633 - 647
  • [17] Erosion Wear of AISI 420 Stainless Steel Caused by Walnut Shell Particles
    J. R. Laguna-Camacho
    I. Hernández-Romero
    J. E. Escalante-Martínez
    C. A. Márquez-Vera
    J. L. Galván-López
    J. V. Méndez-Méndez
    I. Arzate-Vázquez
    J. A. Andraca-Adame
    Transactions of the Indian Institute of Metals, 2015, 68 : 633 - 647
  • [18] Microwave plasma nitrided austenitic AISI-304 stainless steel
    Camps, E
    Muhl, S
    Romero, S
    Garcia, JL
    SURFACE & COATINGS TECHNOLOGY, 1998, 106 (2-3): : 121 - 128
  • [19] Wear assessment of plasma nitrided AISI H11 steel
    Rad, H. Forati
    Amadeh, A.
    Moradi, H.
    MATERIALS & DESIGN, 2011, 32 (05) : 2635 - 2643
  • [20] Transition of Wear Mechanisms of Plasma Source Nitrided AISI 316 Austenitic Stainless Steel Against Ceramic Counterface
    Li, G. Y.
    Wang, Z. Y.
    Lei, M. K.
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2012, 134 (01):
12345