Buckling and compressive failure of stepped-lap joints repaired with composite patches

被引：13

作者：

Beylergil, Bertan ^{[1
]}

Aktas, Alaattin ^{[2
]}

Cunedioglu, Yusuf ^{[1
]}

机构：

[1] Nigde Univ, Fac Engn, Dept Mech Engn, Nigde, Turkey

[2] Istanbul Univ, Fac Engn, Dept Mech Engn, Istanbul, Turkey

来源：

JOURNAL OF COMPOSITE MATERIALS | 2012年 / 46卷 / 26期

关键词：

Buckling; FEA; mechanical testing; pultrusion; FINITE-ELEMENT-ANALYSIS; ADHESIVE JOINTS; SHAPE OPTIMIZATION; STRESS-ANALYSIS; SHEAR-STRENGTH; TENSILE; DISTRIBUTIONS; BEHAVIOR; SPEW; THICKNESS;

D O I：

10.1177/0021998312437001

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

In this study, the buckling and compressive failure of adhesively-bonded stepped-lap joints (with/without composite patches) composed of pultruded glass fiber-reinforced polymer composite laminates was investigated experimentally and numerically. Two-component epoxy adhesive was used for bonding purposes. Composite patches were woven glass-epoxy layer. They were added onto the conventional stepped-lap joints so that additional load transfer paths were created and localized stress concentrations near joint edge were reduced. The axial compression tests were performed and the results revealed that the buckling and failure load of new stepped lap composite joints with composite patches were significantly higher than the conventional stepped lap joints. The influence of the overlap length was evaluated. For both types of joints, a small increase was observed in failure loads by increase of the overlap length. Numerical results showed a very good agreement with experimental results.

引用

页码：3213 / 3230

页数：18

共 44 条

[1] Optimisation study of tapered scarf and stepped-lap joints in composite repair patches
Bendemra, Hamza
Compston, Paul
Crothers, Phillip J.
COMPOSITE STRUCTURES, 2015, 130 : 1 - 8
[2] Material and adhesive effect in adhesively-bonded composite stepped-lap joints
Brito, R. F. N.
Campilho, R. D. S. G.
Moreira, R. D. F.
Sanchez-Arce, I. J.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2020, 234 (13) : 1967 - 1979
[3] Comparative evaluation of adhesively-bonded single-lap and stepped-lap joints
Silva, J. O. S.
Campilho, R. D. S. G.
Rocha, R. J. B.
Silva, F. J. G.
29TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM 2019): BEYOND INDUSTRY 4.0: INDUSTRIAL ADVANCES, ENGINEERING EDUCATION AND INTELLIGENT MANUFACTURING, 2019, 38 : 1189 - 1196
[4] Progressive damage behaviors of the stepped-lap composite joints under bending load
Liu, Bin
Gao, Nongyue
Tang, Bosen
Gao, Yidi
Jin, Peng
Lu, Zhixian
Fu, Zaiguo
JOURNAL OF COMPOSITE MATERIALS, 2020, 54 (14) : 1875 - 1887
[5] Modelling Stepped-Lap Adhesive Joints by the Extended Finite Element Method
Machado, R. M. D.
Campilho, R. D. S. G.
Rocha, R. J. B.
Silva, F. J. G.
TRANSDISCIPLINARY ENGINEERING METHODS FOR SOCIAL INNOVATION OF INDUSTRY 4.0, 2018, 7 : 684 - 692
[6] Numerical bond assessment of carbon-epoxy stepped-lap joints
Biscaia, Hugo C.
Micaelo, Rui
Cornetti, Pietro
Almeida, Raquel
ENGINEERING FRACTURE MECHANICS, 2023, 289
[7] Experimental and numerical analysis of dual-adhesive stepped-lap aluminum joints
Ferreira, C. L.
Campilho, R. D. S. G.
Moreira, R. D. F.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2020, 234 (05) : 454 - 464
[8] Buckling of Perforated Plates Repaired with Composite Patches
Rezaeepazhand, J.
Sabori, H.
ADVANCES IN FRACTURE AND DAMAGE MECHANICS VII, 2008, 385-387 : 377 - +
[9] Prediction of Failure Pressure in Pipelines with Localized Defects Repaired by Composite Patches
Saffar, A.
Darvizeh, A.
Ansari, R.
Kazemi, A.
Alitavoli, M.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2019, 19 (06) : 1801 - 1814
[10] Tensile and buckling properties of notched 6063 aluminum repaired with composite patches
Dindar, Berkant
Agir, Inan
EMERGING MATERIALS RESEARCH, 2021, 10 (02) : 139 - 144

← 1 2 3 4 5 →