Structural characterization of aluminium alloy 7075-graphite composites fabricated by mechanical alloying and hot extrusion

被引：54

作者：

Deaquino-Lara, R. ^{[1
,2
]}

Gutierrez-Castaneda, E. ^{[2
]}

Estrada-Guel, I. ^{[1
]}

Hinojosa-Ruiz, G. ^{[3
]}

Garcia-Sanchez, E. ^{[4
]}

Herrera-Ramirez, J. M. ^{[1
]}

Perez-Bustamante, R. ^{[1
]}

Martinez-Sanchez, R. ^{[1
]}

机构：

[1] Ctr Invest Mat Avanzados CIMAV, Lab Nacl Nanotecnol, Chihuahua 31109, Mexico

[2] Ctr Invest & Estudios Avanzados IPN CINVESTAV, Ramos Arizpe 25000, Coahuila, Mexico

[3] ITS, Saltillo 25280, Coahuila, Mexico

[4] UANL, FIME CIDET, San Nicolas De Los Garza, NL, Mexico

来源：

MATERIALS & DESIGN | 2014年 / 53卷

关键词：

Aluminium graphite composites; Mechanical properties; AL-C SYSTEM; CHROMIUM CARBIDES; MICROSTRUCTURE; TEMPERATURE; CARBON; AL4C3;

D O I：

10.1016/j.matdes.2013.08.005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The modification on the microstructure and mechanical response of some Al-7075-graphite composites fabricated by mechanical alloying and hot extrusion were studied as a direct function of milling time (0-10 h) and graphite concentration (0-1.5 wt.%). The experimental results show that the mechanical properties of the resulting composites are enhanced by increasing both the milling time and the graphite content. This effect is attributed mainly to grain size refining, Al4C3 phase formation and an increase of the dislocation density. The yield strength of the hot-extruded samples varies with grain size according to the Hall-Petch relationship. During the hot-extrusion process, recrystallization of samples milled for 10 h occurs faster than in samples with 5 h of milling, which is associated to the increase of stored energy in the composites caused by the milling process. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：1104 / 1111

页数：8

共 26 条

[1]

[Anonymous], ASM HDB

[2] Gibbs energies of formation of chromium carbides [J].

Anthonysamy, S ;

Ananthasivan, K ;

Kaliappan, I ;

Chandramouli, V ;

Rao, PRV ;

Mathews, CK ;

Jacob, KT .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (07) :1919-1924

[3] Production and characterization of in situ Al4C3 reinforced aluminum-based composite produced by mechanical alloying technique [J].

Arik, H .

MATERIALS & DESIGN, 2004, 25 (01) :31-40

[4] DISLOCATION GENERATION DUE TO DIFFERENCES BETWEEN THE COEFFICIENTS OF THERMAL-EXPANSION [J].

ARSENAULT, RJ ;

SHI, N .

MATERIALS SCIENCE AND ENGINEERING, 1986, 81 (1-2) :175-187

[5] Preparation, microstructure and properties of Al-Al4C3 system produced by mechanical alloying [J].

Besterci, M .

MATERIALS & DESIGN, 2006, 27 (05) :416-421

[6] Microstructure characteristics in Al-C system after mechanical alloying and high temperature treatment [J].

Bostan, B ;

Özdemir, AT ;

Kalkanli, A .

POWDER METALLURGY, 2004, 47 (01) :37-42

[7] Synthesis of aluminum alloy 7075-graphite composites by milling processes and hot extrusion [J].

Deaquino-Lara, R. ;

Estrada-Guel, I. ;

Hinojosa-Ruiz, G. ;

Flores-Campos, R. ;

Herrera-Ramirez, J. M. ;

Martinez-Sanchez, R. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 :S284-S289

[8]

Dieter R, 1998, MECH METALLURGY

[9] Graphite nanoparticle dispersion in 7075 aluminum alloy by means of mechanical alloying [J].

Estrada-Guel, I. ;

Carreno-Gallardo, C. ;

Mendoza-Ruiz, D. C. ;

Miki-Yoshida, M. ;

Rocha-Rangel, E. ;

Martinez-Sanchez, R. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 483 (1-2) :173-177

[10] Strengthening in carbon nanotube/aluminium (CNT/Al) composites [J].

George, R ;

Kashyap, KT ;

Raw, R ;

Yamdagni, S .

SCRIPTA MATERIALIA, 2005, 53 (10) :1159-1163

← 1 2 3 →